Деталі виробу
4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Номер деталі (MPN)
Імпеданс
50 Ohm
Інтерфейс
4.3-10
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Cable Assemblies |
|---|---|
| Інтерфейс | TFT-5G-402 |
| Інтерфейс | 4.3-10 |
| Інтерфейс | 7/16 DIN |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Тип конектора | Male |
| Тип конектора | Female |
| Орієнтація | Right Angle |
| Орієнтація | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Монтаж | 4 Hole Flange |
| Тип кабелю | TFT-5G-402 |
| Category | Cable Assemblies |
Опис
Поточні довідкові дані для PE3C8304: 4.3-10 · 50 Ohm · 4 Hole Flange. У каталозі конфігурацію вказано як: Right Angle. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Монтаж указано як 4 Hole Flange. Якщо важливі обмеження панелі, прохідного монтажу чи фланця, надішліть розміри з RFQ. Матеріал указано як Brass. Це допомагає перевірці, але не замінює підтвердження повної конструкції проєкту. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
EZ-400-NMH-PL-X-LC
L-com's N Male connector for LMR-400, LMR-400-DB, LMR-400-FR and 400-Series coax uses a Crimp/Non-Solder Contact attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for EZ-400-NMH-PL-X-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
LCCA30218-FT5
L-com's LCCA30218-FT5 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT5 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31H014 102 5 U
Circular DIN роз'єми чоловічий кабель роз'єм, Quicklock, розмір M16, 14 контакти, срібло контакт Plating, 14A Arrangement, кабель Diameter 8.5-10.5 mm
PE44536
7/16 DIN Male Connector Crimp/Solder Attachment for PE-C195, PE-P195, RG58, RG141, RG303, LMR-195, 0.195 inch
LCCA30215-FT5
L-com's LCCA30215-FT5 is a low loss N male to N female bulkhead cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30215-FT5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
557-107NF3-02B
D-Sub задні кожухи LIGHT WEIGHT SOLID BANDING задній кожух
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Cstone Technology — це китайський партнер з експортного постачання сумісних альтернатив і не пов’язана з оригінальними брендами. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.