Detalles del producto
4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Número de parte (MPN)
Impedancia
50 Ohm
Interfaz
4.3-10
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Cable Assemblies |
|---|---|
| Interfaz | TFT-5G-402 |
| Interfaz | 4.3-10 |
| Interfaz | 7/16 DIN |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Género | Male |
| Género | Female |
| Orientación | Right Angle |
| Orientación | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Montaje | 4 Hole Flange |
| Tipo de cable | TFT-5G-402 |
| Category | Cable Assemblies |
Descripción
Los datos de referencia para PE3C8304 incluyen actualmente: 4.3-10 · 50 Ohm · 4 Hole Flange. El catálogo muestra actualmente la configuración como: Right Angle. La impedancia se indica como 50 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. El montaje se indica como 4 Hole Flange. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como Brass. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
EZ-400-NMH-PL-X-LC
L-com's N Male connector for LMR-400, LMR-400-DB, LMR-400-FR and 400-Series coax uses a Crimp/Non-Solder Contact attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for EZ-400-NMH-PL-X-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
LCCA30218-FT5
L-com's LCCA30218-FT5 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT5 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31H014 102 5 U
Circular DIN conectores macho cable conector Quicklock tamaño M16 14 contactos plata contacto Plating 14A Arrangement cable Diameter 8.5-10.5 mm
PE44536
7/16 DIN Male Connector Crimp/Solder Attachment for PE-C195, PE-P195, RG58, RG141, RG303, LMR-195, 0.195 inch
LCCA30215-FT5
L-com's LCCA30215-FT5 is a low loss N male to N female bulkhead cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30215-FT5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
557-107NF3-02B
carcasas traseras D-Sub LIGHT WEIGHT SOLID BANDING carcasa trasera
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.