उत्पाद विवरण
4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
पार्ट नंबर (MPN)
प्रतिबाधा
50 Ohm
इंटरफ़ेस
4.3-10
drawing से custom RF cable assembly के लिए production sourcing
Compatibility review, MOQ guidance और cost-down sourcing support के साथ production-oriented drawing से custom RF cable assembly।
RFQ से पहले क्या तैयार करें स्पष्ट इनपुट अनुमान कम करते हैं और उपयोगी उत्तर को तेज़ करते हैं। ⌄
- • समीक्षा के लिए प्रासंगिक हो तो संदर्भ MPN, मिलान वाला पार्ट या स्रोत ब्रांड साझा करें।
- • यदि परियोजना प्रोटोटाइप मात्रा से आगे है तो BOM, मात्रा विभाजन और वार्षिक मांग जोड़ें।
- • ड्रॉइंग, डेटा शीट या प्रतिबाधा, आवृत्ति, माउंटिंग और प्लेटिंग की महत्वपूर्ण आवश्यकताएँ संलग्न करें।
चित्र
बड़ा करने के लिए क्लिक करें।
Specifications
| इंटरफ़ेस | Cable Assemblies |
|---|---|
| इंटरफ़ेस | TFT-5G-402 |
| इंटरफ़ेस | 4.3-10 |
| इंटरफ़ेस | 7/16 DIN |
| प्रतिबाधा | 50 Ohm |
| प्रतिबाधा | 50 Ohm |
| प्रतिबाधा | 50 Ohm |
| जेंडर | Male |
| जेंडर | Female |
| ओरिएंटेशन | Right Angle |
| ओरिएंटेशन | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| माउंटिंग | 4 Hole Flange |
| केबल प्रकार | TFT-5G-402 |
| Category | Cable Assemblies |
विवरण
PE3C8304 के लिए मौजूदा संदर्भ डेटा: 4.3-10 · 50 Ohm · 4 Hole Flange। कैटलॉग में कॉन्फ़िगरेशन इस प्रकार दिया गया है: Right Angle। प्रतिबाधा 50 Ohm दी गई है। यदि यह पैरामीटर महत्वपूर्ण है, तो RFQ में फिर से पुष्टि करें। माउंटिंग 4 Hole Flange दी गई है। यदि पैनल, थ्रू-पैनल या फ्लैंज सीमाएँ महत्वपूर्ण हैं, तो RFQ के साथ आयाम भेजें। सामग्री Brass दी गई है। यह समीक्षा में मदद करती है, लेकिन पूरी परियोजना संरचना की पुष्टि का विकल्प नहीं है। इस पृष्ठ का उपयोग RFQ से पहले चयन सूची बनाने के लिए करें; यह अंतिम स्वीकृति नहीं है।
RFQ से पहले उम्मीदवार चुनने के लिए इस पृष्ठ का उपयोग करें। MOQ 200+ आपूर्ति मार्ग और कस्टम उत्पादन मार्ग ड्रॉइंग/विनिर्देश/BOM समीक्षा के बाद पुष्टि होते हैं।
समान कनेक्टर
आपको ये मॉडल भी रुचिकर लग सकते हैं:
EZ-400-NMH-PL-X-LC
L-com's N Male connector for LMR-400, LMR-400-DB, LMR-400-FR and 400-Series coax uses a Crimp/Non-Solder Contact attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for EZ-400-NMH-PL-X-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
LCCA30218-FT5
L-com's LCCA30218-FT5 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT5 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31H014 102 5 U
Circular DIN कनेक्टर पुरुष केबल कनेक्टर, Quicklock, Size M16, 14 कॉन्टैक्ट, चांदी कॉन्टैक्ट Plating, 14A Arrangement, केबल Diameter 8.5-10.5 mm
PE44536
7/16 DIN Male Connector Crimp/Solder Attachment for PE-C195, PE-P195, RG58, RG141, RG303, LMR-195, 0.195 inch
LCCA30215-FT5
L-com's LCCA30215-FT5 is a low loss N male to N female bulkhead cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30215-FT5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
557-107NF3-02B
D-Sub बैकशेल LIGHT WEIGHT SOLID BANDING बैकशेल
MPN खोज Exact, prefix और partial matching समर्थित है। ⌄
अस्वीकरण
निर्माता के नाम, ट्रेडमार्क, प्रतीक और पार्ट नंबर केवल पहचान और क्रॉस-रेफ़रेंस के लिए उपयोग किए जाते हैं। Cstone Technology संगत विकल्पों के लिए चीन स्थित निर्यात सोर्सिंग पार्टनर है और मूल ब्रांडों से संबद्ध नहीं है। ट्रेडमार्क उनके संबंधित स्वामियों की संपत्ति बने रहते हैं। अंतिम उपयुक्तता RFQ के दौरान ड्रॉइंग/स्पेसिफ़िकेशन समीक्षा से पुष्टि की जाती है।