CSTONE
فهرست RFQ

جزئیات محصول

4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components

جایگزین سازگار تأمین‌شده از چین — سازگاری با بررسی نقشه/مشخصات تأیید می‌شود.

شماره قطعه (MPN)

PE3C8304

Impedance

50 Ohm

Interface

4.3-10

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.

کابل RF سفارشی از روی نقشه →
WhatsApp — پاسخ سریع
زمان تحویل: ۳–۶ هفته | MOQ: 200+ عدد
پیش از RFQ ورودی‌های واضح بررسی را سریع‌تر می‌کند. ⌄
  • • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
  • • برای پروژه‌های تولیدی، BOM و تفکیک حجم را اضافه کنید.
  • • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.

تصویر

برای بزرگ‌نمایی روی تصویر کلیک کنید.

تصویر محصول

PE3C8304 product photo

PE3C8304 product photo

1 / 2

مشخصات

مشخصات PE3C8304
اینترفیسCable Assemblies
اینترفیسTFT-5G-402
اینترفیس4.3-10
اینترفیس7/16 DIN
امپدانس50 Ohm
امپدانس50 Ohm
امپدانس50 Ohm
جنسیتMale
جنسیتFemale
جهت‌گیریRight Angle
جهت‌گیریStraight
Connector 1 Body MaterialBrass
نمایش 6 مشخصه بیشتر
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
نصب4 Hole Flange
نوع کابلTFT-5G-402
CategoryCable Assemblies

توضیح

داده مرجع فعلی برای PE3C8304: 4.3-10 · 50 Ohm · 4 Hole Flange. کاتالوگ فعلاً این پیکربندی را نشان می‌دهد: Right Angle. امپدانس به‌صورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. نصب به‌صورت 4 Hole Flange ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس به‌صورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.

از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید می‌شود؛ موجودی آماده فرض نمی‌شود.

کانکتورهای مشابه

مدل‌های مرتبط:

LCCA30202-FT1.5

L-com's LCCA30202-FT1.5 is a low loss N male to N male cable assembly using LMR-400-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT1.5 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

مشاهده جزئیات →

LMR-240-DB-LC

LMR-240-DB-LC coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-240-DB-LC coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-240-DB-LC is constructed with a 0.24 inch diameter and Black PE jacket. LMR-240-DB-LC flexible 50 Ohm coax cable with PE jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.24 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-240-DB-LC coax is constructed with PE (F) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-240-DB-LC coax cable specs for this wire properties can be found on its RF coax cable LMR-240-DB-LC datasheet. LMR-240-DB-LC cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-240-DB-LC coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.

مشاهده جزئیات →

T3650-058

Circular DIN Connectors MALE CABLE CONNECTOR 12 WAY

مشاهده جزئیات →

C016-10H019-003-2

Circular DIN Connectors MALE CABLE CONNECTOR 19+PE

مشاهده جزئیات →

171-0275

DIN Connectors DIN 5 PIN BLACK

مشاهده جزئیات →

N-CR

The N-CR is an N75Ω Receptacle. This connector is suitable for various high-frequency applications. It features a impedance 75Ω, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -30 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Terminal Shape is solder. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.

مشاهده جزئیات →
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود. ⌄

جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

سلب مسئولیت

Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعه‌های کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشه‌های 2D یا نمونه تولید می‌کنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید می‌شود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده می‌شوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید می‌شود.