Chi tiết sản phẩm
Flexible 0.59 in 50 Ohm
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Tần số
2.62 dB
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | Coaxial Bulk Cable |
|---|---|
| Giao diện | Flexible |
| Giao diện | PE (F) |
| Giao diện | Solid |
| Giao diện | Coax |
| Trở kháng | 50 Ohm |
| Tần số (tối đa) | 5.8 GHz |
| Generic Name | LMR-600 |
| Velocity of Propagation | 87 % |
| Giới tính đầu nối | 0.59 in |
| Giới tính đầu nối | PE |
| No. of Shields | 2 |
Show 7 more specs
| Tần số (tối đa) | 2.62 dB |
|---|---|
| RF Shielding | 90 dB |
| Max Operating Temperature | 85 deg C |
| Inner Conductor, Number of Strands | 1 |
| Minimum Bend Radius, One Time | 1.5 in |
| Minimum Bend Radius, Repeated | 6 in |
| Category | Coaxial Bulk Cable |
Mô tả
Dữ liệu tham chiếu hiện có cho LMR-600: 50 Ohm · 2.62 dB. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Tần số được ghi là 2.62 dB. Giới hạn vận hành thực tế vẫn phụ thuộc vào cụm lắp ráp, đầu ghép nối và bối cảnh ứng dụng. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Vật liệu được ghi là PE. Thông tin này hữu ích cho rà soát, nhưng không thay thế việc xác nhận toàn bộ kết cấu dự án. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
PE3C2713
7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Low Loss Cable Using LMR-400 Coax
600-0700
DIN đầu nối ổ cắm 7C niken
L717SDE09P1ACO4RC309
Đầu nối D-Sub tiêu chuẩn D-SUB, Stamped Signal 3A, Góc vuông PCB Xuyên lỗ, FP=10.40 mm (.409in), Row Pitch 2.54 mm, 09 chân, 0.76 m (30 in) vàng, Bright thiếc Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab với Clear Hole không có Boardlock
LCCA30222-FT1.5
L-com's LCCA30222-FT1.5 is a low loss N male to N female bulkhead cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30222-FT1.5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30219-FT5
L-com's LCCA30219-FT5 is a low loss N male to N male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT5 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
7/16P50TD6G-30W
The 7/16P50TD6G-30W is an 7/16 DIN Terminator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and an excellent V.S.W.R 1.2(Max.) at DC~3 GHz, 1.35(Max.) at 3~6 GHz. Withstanding temperatures from -45 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Ternary Plating. Rated Power is 30W. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.