تفاصيل المنتج
Flexible 0.59 in 50 Ohm
رقم الجزء (MPN)
المعاوقة
50 Ohm
التردد
2.62 dB
كابل RF مخصص من الرسم لتوريد الإنتاج
كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة. ⌄
- • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
- • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
- • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.
الصورة
انقر للتكبير.
Specifications
| الواجهة | Coaxial Bulk Cable |
|---|---|
| الواجهة | Flexible |
| الواجهة | PE (F) |
| الواجهة | Solid |
| الواجهة | Coax |
| المعاوقة | 50 Ohm |
| التردد (الحد الأقصى) | 5.8 GHz |
| Generic Name | LMR-600 |
| Velocity of Propagation | 87 % |
| نوع الموصل | 0.59 in |
| نوع الموصل | PE |
| No. of Shields | 2 |
Show 7 more specs
| التردد (الحد الأقصى) | 2.62 dB |
|---|---|
| RF Shielding | 90 dB |
| Max Operating Temperature | 85 deg C |
| Inner Conductor, Number of Strands | 1 |
| Minimum Bend Radius, One Time | 1.5 in |
| Minimum Bend Radius, Repeated | 6 in |
| Category | Coaxial Bulk Cable |
الوصف
البيانات المرجعية الحالية لـ LMR-600: 50 Ohm · 2.62 dB. المعاوقة مدرجة كـ 50 Ohm. إذا كان هذا العامل حرجًا، فأكده مرة أخرى في RFQ. التردد مدرج كـ 2.62 dB. الحد التشغيلي الفعلي يعتمد على التجميع وقطعة التزاوج وسياق الاستخدام. إذا لم تظهر طريقة التركيب هنا، فأكدها من الرسم أو متطلبات التزاوج. المادة مدرجة كـ PE. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.
استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.
موصلات مشابهة
قد تهمك أيضًا هذه النماذج:
PE3C2713
7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Low Loss Cable Using LMR-400 Coax
600-0700
DIN موصلات مقبس 7 °C نيكل
L717SDE09P1ACO4RC309
موصلات D-Sub القياسية D-SUB, Stamped Signal 3A, زاوية قائمة PCB ثقب نافذ, FP=10.40 mm (.409in), Row Pitch 2.54 mm, 09 سن, 0.76 m (30 in) ذهب, Bright قصدير Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab مع Clear Hole بدون Boardlock
LCCA30222-FT1.5
L-com's LCCA30222-FT1.5 is a low loss N male to N female bulkhead cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30222-FT1.5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30219-FT5
L-com's LCCA30219-FT5 is a low loss N male to N male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT5 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
7/16P50TD6G-30W
The 7/16P50TD6G-30W is an 7/16 DIN Terminator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and an excellent V.S.W.R 1.2(Max.) at DC~3 GHz, 1.35(Max.) at 3~6 GHz. Withstanding temperatures from -45 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Ternary Plating. Rated Power is 30W. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية. ⌄
إخلاء المسؤولية
Cstone مصنع متخصص، وليس شركة تجارة، لموصلات RF والمحورية والمهايئات وتجميعات الكابلات، بما في ذلك N-type وBNC وSMA وSMP وSSMB وMMCX. نصنع الموصلات حسب رسومات 2D أو العينات، ونؤكد الملاءمة وMOQ والمهلة وتفاصيل الإنتاج عبر RFQ. لا ترتبط Cstone Technology بالعلامات الأصلية. تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.