جزئیات محصول
Flexible 0.59 in 50 Ohm
شماره قطعه (MPN)
Impedance
50 Ohm
Frequency
2.62 dB
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Coaxial Bulk Cable |
|---|---|
| اینترفیس | Flexible |
| اینترفیس | PE (F) |
| اینترفیس | Solid |
| اینترفیس | Coax |
| امپدانس | 50 Ohm |
| فرکانس (حداکثر) | 5.8 GHz |
| Generic Name | LMR-600 |
| Velocity of Propagation | 87 % |
| جنسیت | 0.59 in |
| جنسیت | PE |
| No. of Shields | 2 |
نمایش 7 مشخصه بیشتر
| فرکانس (حداکثر) | 2.62 dB |
|---|---|
| RF Shielding | 90 dB |
| Max Operating Temperature | 85 deg C |
| Inner Conductor, Number of Strands | 1 |
| Minimum Bend Radius, One Time | 1.5 in |
| Minimum Bend Radius, Repeated | 6 in |
| Category | Coaxial Bulk Cable |
توضیح
داده مرجع فعلی برای LMR-600: 50 Ohm · 2.62 dB. امپدانس بهصورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. فرکانس بهصورت 2.62 dB ثبت شده است. حد واقعی هنوز به مجموعه، جفت اتصال و کاربرد وابسته است. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. جنس بهصورت PE ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
PE3C2713
7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Low Loss Cable Using LMR-400 Coax
600-0700
DIN Connectors SCKT 7C NICKEL
L717SDE09P1ACO4RC309
D-Sub Standard Connectors Dsub, Stamped Signal 3A, Right Angle PCB Thru Hole, FP=10.40mm (.409in), Row Pitch 2.54mm, 09 Pin, 0.76 m (30 in) Gold, Bright Tin Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab with Clear Hole Without Boardlock
LCCA30222-FT1.5
L-com's LCCA30222-FT1.5 is a low loss N male to N female bulkhead cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30222-FT1.5 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30219-FT5
L-com's LCCA30219-FT5 is a low loss N male to N male cable assembly using LMR-600-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT5 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
7/16P50TD6G-30W
The 7/16P50TD6G-30W is an 7/16 DIN Terminator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and an excellent V.S.W.R 1.2(Max.) at DC~3 GHz, 1.35(Max.) at 3~6 GHz. Withstanding temperatures from -45 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Ternary Plating. Rated Power is 30W. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعههای کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشههای 2D یا نمونه تولید میکنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید میشود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.