Chi tiết sản phẩm
SMA thẳng bấm jack 1.13 mm micro-cáp Bulkhead 50 Ω IP67
Mã linh kiện (MPN)
Trở kháng
50
Tần số
6
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Hoàn thiện thân | Vàng |
|---|---|
| Vật liệu thân | Đồng thau |
| Loại cáp (kết cuối tới) | 1.13 mm micro-cáp |
| Hoàn thiện tiếp điểm | Vàng |
| Vật liệu tiếp điểm | Đồng thau |
| Kết cuối tiếp điểm | Hàn |
| Cơ chế ghép nối | Threaded |
| Mã phân loại kiểm soát xuất khẩu | EAR99 |
| Tần số (tối đa) | 6 |
| Giới tính | Jack |
| Cấp bảo vệ IP | IP67 |
| Trở kháng | 50 |
Show 14 more specs
| Vật liệu chất cách điện | PTFE |
|---|---|
| Được cách ly | Không |
| Low PIM | Không |
| Đạt chuẩn MIL | Không đạt chuẩn MIL |
| Không từ tính | Không |
| Hướng | Thẳng |
| Đặc tính lắp bảng | Bulkhead - Rear lắp |
| Kiểu lắp | 0.037 Inches (0.93 mm) |
| Cổng | 1 (Single Port) |
| Danh mục kích thước | Subminiature |
| Nhiệt độ tối đa (°C) | 165 |
| Nhiệt độ tối thiểu (°C) | -65 |
| Kiểu kết cuối | cáp - bấm |
| Chiều ren | tiêu chuẩn |
Mô tả
Dữ liệu tham chiếu hiện có cho 132422: 50 · 6 · 0.037 Inches (0.93 mm). Trở kháng được ghi là 50. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Tần số được ghi là 6. Giới hạn vận hành thực tế vẫn phụ thuộc vào cụm lắp ráp, đầu ghép nối và bối cảnh ứng dụng. Với dự án tần số cao, hãy gửi bản vẽ, đường đi cáp và yêu cầu quan trọng ngay trong RFQ đầu tiên. Kiểu lắp đặt được ghi là 0.037 Inches (0.93 mm). Nếu có giới hạn về panel, lắp xuyên vách hoặc mặt bích, hãy gửi kích thước cùng RFQ. Danh mục cũng ghi mức kín hoặc bảo vệ IP67. Hãy đối chiếu với yêu cầu môi trường thực tế trong RFQ. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
A85N30-85S-
SMA jack bulkhead IP67 mated đến N phích cắm using .085 conformable
AD30S-A3A8-27-1.25
30° Angle SMA plug to SMA jack 27GHz VSWR1.2
2-core (Zipcord) OM3 LC-FC
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, multimode (OM3), with LC-FC connectors.Example model: TFC-2C-OM3-LC-FC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
LCCA30012-FT1.5
L-com low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30012-FT1.5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and right angle SMA connection on the other. This low loss SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30012-FT1.5 can also be known as low loss SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30012-FT1.5 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA right angle male cables are located on the LCCA30012-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT.
LCCA30224-FT6
L-com's LCCA30224-FT6 is a low loss SMA male to TNC male cable assembly using LMR-100 coax, 6 FT with Times Microwave components and ships same-day. The LMR-100A-PVC coax of this SMA cable uses the PE dielectric with a VoP of 66%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-100A-PVC series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30224-FT6 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-100 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Bundled (2-core) OM1 MU-OPEN
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a bundled cable (2-core), multimode (OM1), with MU-OPEN connectors.Example model: TFC-2C-OM1-MU-OPEN-1m-CYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.