รายละเอียดสินค้า
SMA ตรง ย้ำ แจ็ค 1.13 mm ไมโคร-สายเคเบิล Bulkhead 50 Ω IP67
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50
ความถี่
6
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| ผิวบอดี้ | ทอง |
|---|---|
| วัสดุบอดี้ | ทองเหลือง |
| สายเคเบิล ประเภท (Terminates ถึง) | 1.13 mm ไมโคร-สายเคเบิล |
| ผิวคอนแทค | ทอง |
| วัสดุคอนแทค | ทองเหลือง |
| การเข้าปลายคอนแทค | บัดกรี |
| กลไกการล็อก | เกลียว |
| หมายเลขควบคุมการส่งออก | EAR99 |
| ความถี่ (สูงสุด) | 6 |
| เพศ | แจ็ค |
| ระดับ IP | IP67 |
| อิมพีแดนซ์ | 50 |
Show 14 more specs
| วัสดุอินซูเลเตอร์ | PTFE |
|---|---|
| แยกวงจร | ไม่ |
| Low PIM | ไม่ |
| ผ่านมาตรฐาน MIL | ไม่ผ่านมาตรฐาน MIL |
| ไม่เป็นแม่เหล็ก | ไม่ |
| ทิศทาง | ตรง |
| คุณสมบัติการติดตั้งบนแผง | Bulkhead - Rear ติดตั้ง |
| แผง Thickness (Max) | 0.037 Inches (0.93 mm) |
| พอร์ต | 1 (Single Port) |
| หมวดขนาด | Subminiature |
| อุณหภูมิ (สูงสุด °C) | 165 |
| อุณหภูมิ (ต่ำสุด °C) | -65 |
| รูปแบบการเข้าปลาย | สายเคเบิล - ย้ำ |
| ทิศทางเกลียว | มาตรฐาน |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ 132422: 50 · 6 อิมพีแดนซ์ระบุเป็น 50 หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ ความถี่ระบุเป็น 6 ขีดจำกัดใช้งานจริงยังขึ้นกับชุดประกอบ ชิ้นส่วนคู่ต่อ และบริบทการใช้งาน สำหรับโครงการความถี่สูง ให้แนบแบบ เส้นทางสาย และข้อกำหนดสำคัญตั้งแต่ RFQ แรก หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ แคตตาล็อกยังระบุค่าการซีลหรือการป้องกัน IP67 โปรดเทียบกับสภาพแวดล้อมใช้งานจริงใน RFQ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
A85N30-85S-
SMA แจ็ค bulkhead IP67 mated ถึง N ปลั๊ก using .085 conformable
AD30S-A3A8-27-1.25
30° Angle SMA plug to SMA jack 27GHz VSWR1.2
2-core (Zipcord) OM3 LC-FC
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, multimode (OM3), with LC-FC connectors.Example model: TFC-2C-OM3-LC-FC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
LCCA30012-FT1.5
L-com low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30012-FT1.5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and right angle SMA connection on the other. This low loss SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30012-FT1.5 can also be known as low loss SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30012-FT1.5 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA right angle male cables are located on the LCCA30012-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT.
LCCA30224-FT6
L-com's LCCA30224-FT6 is a low loss SMA male to TNC male cable assembly using LMR-100 coax, 6 FT with Times Microwave components and ships same-day. The LMR-100A-PVC coax of this SMA cable uses the PE dielectric with a VoP of 66%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-100A-PVC series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30224-FT6 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-100 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Bundled (2-core) OM1 MU-OPEN
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a bundled cable (2-core), multimode (OM1), with MU-OPEN connectors.Example model: TFC-2C-OM1-MU-OPEN-1m-CYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
ชื่อผู้ผลิต เครื่องหมายการค้า สัญลักษณ์ และหมายเลขชิ้นส่วนใช้เพื่อการระบุตัวตนและอ้างอิงข้ามเท่านั้น Cstone Technology เป็นพันธมิตรจัดหาสินค้าส่งออกจากประเทศจีนสำหรับทางเลือกที่เข้ากันได้ และไม่มีส่วนเกี่ยวข้องกับแบรนด์ดั้งเดิม เครื่องหมายการค้ายังคงเป็นทรัพย์สินของเจ้าของที่เกี่ยวข้อง ความเหมาะสมขั้นสุดท้ายได้รับการยืนยันโดยการตรวจสอบแบบ/สเปกระหว่าง RFQ