Detalles del producto
SMA recto crimpado jack 1.13 mm micro-cable Bulkhead 50 Ω IP67
Número de parte (MPN)
Impedancia
50
Frecuencia
6
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Acabado del cuerpo | oro |
|---|---|
| Material del cuerpo | latón |
| Grado IP | 1.13 mm micro-cable |
| Terminación | oro |
| Terminación | latón |
| Terminación | soldadura |
| Mecanismo de acoplamiento | Threaded |
| Número ECCN | EAR99 |
| Frecuencia (máx.) | 6 |
| Género | jack |
| Grado IP | IP67 |
| Impedancia | 50 |
Show 14 more specs
| Material del aislante | PTFE |
|---|---|
| Aislado | no |
| Bajo PIM | no |
| Calificación MIL | Not Mil Qualified |
| No magnético | no |
| Orientación | recto |
| Montaje | Bulkhead - Rear montaje |
| Montaje | 0.037 Inches (0.93 mm) |
| Puertos | 1 (Single Port) |
| Categoría de tamaño | Subminiature |
| Temp. máxima (°C) | 165 |
| Temp. mínima (°C) | -65 |
| Estilo de terminación | cable - crimpado |
| Dirección de rosca | estándar |
Descripción
Los datos de referencia para 132422 incluyen actualmente: 50 · 6 · Bulkhead - Rear montaje. La impedancia se indica como 50. Si es un parámetro crítico, confírmelo en el RFQ. La frecuencia se indica como 6. El límite real depende del ensamblaje, par de acoplamiento y contexto. Para proyectos de alta frecuencia, incluya el plano, ruta de cable y requisitos críticos en el primer RFQ. El montaje se indica como Bulkhead - Rear montaje. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como latón. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. El catálogo también muestra un valor de sellado/protección: IP67. Verifíquelo con el requisito real. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
A85N30-85S-
SMA jack bulkhead IP67 mated a N enchufe using .085 conformable
AD30S-A3A8-27-1.25
30° Angle SMA plug to SMA jack 27GHz VSWR1.2
2-core (Zipcord) OM3 LC-FC
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, multimode (OM3), with LC-FC connectors.Example model: TFC-2C-OM3-LC-FC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
LCCA30012-FT1.5
L-com low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30012-FT1.5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and right angle SMA connection on the other. This low loss SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30012-FT1.5 can also be known as low loss SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30012-FT1.5 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA right angle male cables are located on the LCCA30012-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT.
LCCA30224-FT6
L-com's LCCA30224-FT6 is a low loss SMA male to TNC male cable assembly using LMR-100 coax, 6 FT with Times Microwave components and ships same-day. The LMR-100A-PVC coax of this SMA cable uses the PE dielectric with a VoP of 66%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-100A-PVC series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30224-FT6 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-100 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Bundled (2-core) OM1 MU-OPEN
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a bundled cable (2-core), multimode (OM1), with MU-OPEN connectors.Example model: TFC-2C-OM1-MU-OPEN-1m-CYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.