Ürün detayları
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using RG303 Coax
Parça numarası (MPN)
Empedans
50 Ohm
Arayüz
7/16 DIN
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | Cable Assemblies |
|---|---|
| Arayüz | RG303 |
| Arayüz | 7/16 DIN |
| Arayüz | 7/16 DIN |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Cinsiyet | Male |
| Cinsiyet | Male |
| Yön | Right Angle |
| Yön | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Kablo tipi | RG303/U |
| Category | Cable Assemblies |
Açıklama
PE3W10730 için mevcut referans verileri: 7/16 DIN · 50 Ohm · Right Angle. Katalogdaki yapılandırma şu şekilde listeleniyor: Right Angle. Empedans 50 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Malzeme Brass olarak listeleniyor. İnceleme için yararlıdır, ancak tüm proje yapısının doğrulanmasının yerini tutmaz. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
LCCA30337-FT6
L-com's LCCA30337-FT6 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT6 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
1210641268
Circular DIN konnektör 182 M16 TRASP.H12
GDAK15PF0
D-Sub Standart Konnektörler konnektör providing yüksek-reliability ve moisture protection
CA-200-FOOT
L-com's CA-200 series cable is a high performance low loss coax cable which is ideal for shorter cable runs and "jumper" cables. This cable can be purchased by the reel or by the foot depending on your applications. Order online today!
PE3C7837
7/16 DIN Male to 7/16 DIN Female Low PIM Cable Using 1/4 inch Superflexible Coax
LCCA30338-FT6
L-com's LCCA30338-FT6 is a low loss 4.3-10 male to N male cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30338-FT6 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Cstone, N-type, BNC, SMA, SMP, SSMB ve MMCX dâhil RF ve koaksiyel konnektörler, adaptörler ve kablo montajları üreten profesyonel bir fabrikadır; ticaret şirketi değiliz. Konnektörleri 2D çizim veya numuneye göre üretiriz; uygunluk, MOQ, teslim süresi ve üretim ayrıntıları RFQ ile doğrulanır. Cstone Technology orijinal markalarla bağlantılı değildir. Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.