Detalles del producto
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using RG303 Coax
Número de parte (MPN)
Impedancia
50 Ohm
Interfaz
7/16 DIN
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Cable Assemblies |
|---|---|
| Interfaz | RG303 |
| Interfaz | 7/16 DIN |
| Interfaz | 7/16 DIN |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Género | Male |
| Género | Male |
| Orientación | Right Angle |
| Orientación | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Tipo de cable | RG303/U |
| Category | Cable Assemblies |
Descripción
Los datos de referencia para PE3W10730 incluyen actualmente: 7/16 DIN · 50 Ohm · Right Angle. El catálogo muestra actualmente la configuración como: Right Angle. La impedancia se indica como 50 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como Brass. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30337-FT6
L-com's LCCA30337-FT6 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT6 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
1210641268
Circular DIN conectores conector 182 M16 TRASP.H12
GDAK15PF0
conectores D-Sub estándar conector providing alta-reliability y moisture protection
CA-200-FOOT
L-com's CA-200 series cable is a high performance low loss coax cable which is ideal for shorter cable runs and "jumper" cables. This cable can be purchased by the reel or by the foot depending on your applications. Order online today!
PE3C7837
7/16 DIN Male to 7/16 DIN Female Low PIM Cable Using 1/4 inch Superflexible Coax
LCCA30338-FT6
L-com's LCCA30338-FT6 is a low loss 4.3-10 male to N male cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30338-FT6 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.