Detail produk
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using RG303 Coax
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
7/16 DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | RG303 |
| Antarmuka | 7/16 DIN |
| Antarmuka | 7/16 DIN |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Male |
| Orientasi | Right Angle |
| Orientasi | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Jenis kabel | RG303/U |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE3W10730 saat ini mencakup: 7/16 DIN · 50 Ohm · Right Angle. Katalog saat ini mencantumkan konfigurasi sebagai: Right Angle. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Material tercantum sebagai Brass. Ini membantu peninjauan, tetapi tidak menggantikan konfirmasi struktur proyek secara penuh. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
LCCA30337-FT6
L-com's LCCA30337-FT6 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT6 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
1210641268
Circular DIN konektor 182 M16 TRASP.H12
GDAK15PF0
konektor D-Sub standar konektor providing tinggi-reliability dan moisture protection
CA-200-FOOT
L-com's CA-200 series cable is a high performance low loss coax cable which is ideal for shorter cable runs and "jumper" cables. This cable can be purchased by the reel or by the foot depending on your applications. Order online today!
PE3C7837
7/16 DIN Male to 7/16 DIN Female Low PIM Cable Using 1/4 inch Superflexible Coax
LCCA30338-FT6
L-com's LCCA30338-FT6 is a low loss 4.3-10 male to N male cable assembly using LMR-600 coax, 6 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30338-FT6 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Cstone adalah pabrik profesional, bukan perusahaan dagang, untuk konektor RF dan koaksial, adaptor, serta rakitan kabel termasuk N-type, BNC, SMA, SMP, SSMB, dan MMCX. Kami memproduksi konektor berdasarkan gambar 2D atau sampel; kesesuaian, MOQ, waktu pengiriman, dan detail produksi dikonfirmasi melalui RFQ. Cstone Technology tidak berafiliasi dengan merek asli. Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.