Детали изделия
SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR401FL Coax, RoHS
Номер детали (MPN)
Импеданс
50
Интерфейс
SMA
кабельная РЧ-сборка по чертежу для production sourcing
кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.
Что подготовить до RFQ Чёткие вводные ускоряют проверку. ⌄
- • Укажите справочный MPN и исходный бренд, если это важно.
- • Для серийного проекта добавьте BOM и разбивку количества.
- • Приложите чертёж или ключевые требования к совместимости.
Изображение
Нажмите изображение, чтобы увеличить.
Характеристики
| Интерфейс | Cable Assemblies |
|---|---|
| Интерфейс | PE-SR401FL |
| Интерфейс | SMA |
| Интерфейс | SMA |
| Импеданс | 50 |
| Импеданс | 50 |
| Импеданс | 50 |
| Пол (Gender) | Male |
| Пол (Gender) | Male |
| Ориентация | Right Angle |
| Ориентация | Right Angle |
| Connector Polarity 1 | Standard |
Показать ещё 5 характеристик
| Тип монтажа | None |
|---|---|
| Connector Polarity 2 | Standard |
| Тип монтажа | None |
| Тип кабеля | PE-SR401FL |
| Category | Cable Assemblies |
Описание
Текущие справочные данные для PE34217LF: SMA · 50 · Right Angle. В каталоге конфигурация указана как: Right Angle. Импеданс указан как 50. Если параметр критичен, подтвердите его в RFQ. Если монтаж здесь не указан, подтвердите его по чертежу или требованиям сопряжения. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.
Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.
Похожие разъемы
Похожие модели:
SF1112-6034
RF-адаптеры между сериями SMP M к SMA F PanelMnt адаптер, LD
LCAD30008
These L-com RF Coaxial Adapters are used to interface between SMA to SMB with coaxial connections. The LCAD30008 is a straight adapter with a female to plug configuration. This Coaxial Adapter, SMA Female / SMB Plug is made from brass and has a nickel finish. An SMA interface design is defined by Mil-STD-348A and has many popular features including a threaded coupling method with a robust center contact and outer conductor interface. SMA's generally work up to 18GHz and are a cost effective way of insuring a highly dependable RF Coaxial connection. The SMB interface is smaller than an SMA and uses a snap on connection. An important difference to note is that the SMB Jack (female) interface design has a Male center contact and the SMB Plug (Male) design uses a female socket for the center pin. SMB connectors generally have a maximum operating frequency of 4 GHZ and are available in 50 Ohm and 75 Ohm impedances. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
LCCA30015-FT2
L-com low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30015-FT2 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and TNC bulkhead connection on the other. This low loss SMA to TNC cable from L-com has a male to female gender combination. Our SMA male to TNC female coaxial assembly part number LCCA30015-FT2 can also be known as low loss SMA plug to TNC jack cable assembly when using alternate gender names. SMA plug to TNC jack cable assembly LCCA30015-FT2 is manufactured with a flexible coax. These flexible SMA to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to TNC female bulkhead cables are located on the LCCA30015-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT.
LCCA30377-FT6
L-com low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30377-FT6 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This low loss SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30377-FT6 can also be known as low loss SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30377-FT6 is manufactured with a flexible coax. These flexible SMA to N cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA male to N female bulkhead cables are located on the LCCA30377-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT.
RFAA185J292J
Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.
A80E30-316D-
SMA гнездо к MMCX вилка using RD316
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение. ⌄
Отказ от ответственности
Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Cstone Technology — китайский экспортный партнёр по совместимым альтернативам и не связана с оригинальными брендами. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.