제품 상세
SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR401FL Coax, RoHS
품번 (MPN)
임피던스
50
인터페이스
SMA
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 인터페이스 | Cable Assemblies |
|---|---|
| 인터페이스 | PE-SR401FL |
| 인터페이스 | SMA |
| 인터페이스 | SMA |
| 임피던스 | 50 |
| 임피던스 | 50 |
| 임피던스 | 50 |
| 젠더 | Male |
| 젠더 | Male |
| 방향 | Right Angle |
| 방향 | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| 장착 방식 | None |
|---|---|
| Connector Polarity 2 | Standard |
| 장착 방식 | None |
| 케이블 유형 | PE-SR401FL |
| Category | Cable Assemblies |
설명
PE34217LF의 현재 참조 데이터: SMA · 50 · Right Angle. 카탈로그에는 구성이 Right Angle로 표시되어 있습니다. 임피던스는 50로 표시되어 있습니다. 중요한 매개변수라면 RFQ에서 다시 확인하세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
SF1112-6034
RF 어댑터 - 시리즈 간 SMP M 까지 SMA F PanelMnt 어댑터, LD
LCAD30008
These L-com RF Coaxial Adapters are used to interface between SMA to SMB with coaxial connections. The LCAD30008 is a straight adapter with a female to plug configuration. This Coaxial Adapter, SMA Female / SMB Plug is made from brass and has a nickel finish. An SMA interface design is defined by Mil-STD-348A and has many popular features including a threaded coupling method with a robust center contact and outer conductor interface. SMA's generally work up to 18GHz and are a cost effective way of insuring a highly dependable RF Coaxial connection. The SMB interface is smaller than an SMA and uses a snap on connection. An important difference to note is that the SMB Jack (female) interface design has a Male center contact and the SMB Plug (Male) design uses a female socket for the center pin. SMB connectors generally have a maximum operating frequency of 4 GHZ and are available in 50 Ohm and 75 Ohm impedances. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
LCCA30015-FT2
L-com low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30015-FT2 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and TNC bulkhead connection on the other. This low loss SMA to TNC cable from L-com has a male to female gender combination. Our SMA male to TNC female coaxial assembly part number LCCA30015-FT2 can also be known as low loss SMA plug to TNC jack cable assembly when using alternate gender names. SMA plug to TNC jack cable assembly LCCA30015-FT2 is manufactured with a flexible coax. These flexible SMA to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to TNC female bulkhead cables are located on the LCCA30015-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT.
LCCA30377-FT6
L-com low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30377-FT6 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This low loss SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30377-FT6 can also be known as low loss SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30377-FT6 is manufactured with a flexible coax. These flexible SMA to N cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA male to N female bulkhead cables are located on the LCCA30377-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT.
RFAA185J292J
Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.
A80E30-316D-
SMA 잭 까지 MMCX 플러그 using RD316
면책 조항
Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.