उत्पाद विवरण
SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR401FL Coax, RoHS
पार्ट नंबर (MPN)
प्रतिबाधा
50
इंटरफ़ेस
SMA
drawing से custom RF cable assembly के लिए production sourcing
Compatibility review, MOQ guidance और cost-down sourcing support के साथ production-oriented drawing से custom RF cable assembly।
RFQ से पहले क्या तैयार करें स्पष्ट इनपुट अनुमान कम करते हैं और उपयोगी उत्तर को तेज़ करते हैं। ⌄
- • समीक्षा के लिए प्रासंगिक हो तो संदर्भ MPN, मिलान वाला पार्ट या स्रोत ब्रांड साझा करें।
- • यदि परियोजना प्रोटोटाइप मात्रा से आगे है तो BOM, मात्रा विभाजन और वार्षिक मांग जोड़ें।
- • ड्रॉइंग, डेटा शीट या प्रतिबाधा, आवृत्ति, माउंटिंग और प्लेटिंग की महत्वपूर्ण आवश्यकताएँ संलग्न करें।
चित्र
बड़ा करने के लिए क्लिक करें।
Specifications
| इंटरफ़ेस | Cable Assemblies |
|---|---|
| इंटरफ़ेस | PE-SR401FL |
| इंटरफ़ेस | SMA |
| इंटरफ़ेस | SMA |
| प्रतिबाधा | 50 |
| प्रतिबाधा | 50 |
| प्रतिबाधा | 50 |
| जेंडर | Male |
| जेंडर | Male |
| ओरिएंटेशन | Right Angle |
| ओरिएंटेशन | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| माउंटिंग | None |
|---|---|
| Connector Polarity 2 | Standard |
| माउंटिंग | None |
| केबल प्रकार | PE-SR401FL |
| Category | Cable Assemblies |
विवरण
PE34217LF के लिए मौजूदा संदर्भ डेटा: SMA · 50 · Right Angle। कैटलॉग में कॉन्फ़िगरेशन इस प्रकार दिया गया है: Right Angle। प्रतिबाधा 50 दी गई है। यदि यह पैरामीटर महत्वपूर्ण है, तो RFQ में फिर से पुष्टि करें। यदि यहाँ माउंटिंग जानकारी नहीं है, तो उसे ड्रॉइंग या मिलान आवश्यकता से पुष्टि करें। इस पृष्ठ का उपयोग RFQ से पहले चयन सूची बनाने के लिए करें; यह अंतिम स्वीकृति नहीं है।
RFQ से पहले उम्मीदवार चुनने के लिए इस पृष्ठ का उपयोग करें। MOQ 200+ आपूर्ति मार्ग और कस्टम उत्पादन मार्ग ड्रॉइंग/विनिर्देश/BOM समीक्षा के बाद पुष्टि होते हैं।
समान कनेक्टर
आपको ये मॉडल भी रुचिकर लग सकते हैं:
SF1112-6034
RF एडाप्टर - सीरीज़ के बीच SMP M तक SMA F PanelMnt एडाप्टर, LD
LCAD30008
These L-com RF Coaxial Adapters are used to interface between SMA to SMB with coaxial connections. The LCAD30008 is a straight adapter with a female to plug configuration. This Coaxial Adapter, SMA Female / SMB Plug is made from brass and has a nickel finish. An SMA interface design is defined by Mil-STD-348A and has many popular features including a threaded coupling method with a robust center contact and outer conductor interface. SMA's generally work up to 18GHz and are a cost effective way of insuring a highly dependable RF Coaxial connection. The SMB interface is smaller than an SMA and uses a snap on connection. An important difference to note is that the SMB Jack (female) interface design has a Male center contact and the SMB Plug (Male) design uses a female socket for the center pin. SMB connectors generally have a maximum operating frequency of 4 GHZ and are available in 50 Ohm and 75 Ohm impedances. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
LCCA30015-FT2
L-com low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30015-FT2 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and TNC bulkhead connection on the other. This low loss SMA to TNC cable from L-com has a male to female gender combination. Our SMA male to TNC female coaxial assembly part number LCCA30015-FT2 can also be known as low loss SMA plug to TNC jack cable assembly when using alternate gender names. SMA plug to TNC jack cable assembly LCCA30015-FT2 is manufactured with a flexible coax. These flexible SMA to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to TNC female bulkhead cables are located on the LCCA30015-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 2 FT.
LCCA30377-FT6
L-com low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30377-FT6 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This low loss SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30377-FT6 can also be known as low loss SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30377-FT6 is manufactured with a flexible coax. These flexible SMA to N cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA male to N female bulkhead cables are located on the LCCA30377-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to N female bulkhead cable assembly using 100 series coax, 6 FT.
RFAA185J292J
Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.
A80E30-316D-
SMA जैक तक MMCX प्लग using RD316
MPN खोज Exact, prefix और partial matching समर्थित है। ⌄
अस्वीकरण
निर्माता के नाम, ट्रेडमार्क, प्रतीक और पार्ट नंबर केवल पहचान और क्रॉस-रेफ़रेंस के लिए उपयोग किए जाते हैं। Cstone Technology संगत विकल्पों के लिए चीन स्थित निर्यात सोर्सिंग पार्टनर है और मूल ब्रांडों से संबद्ध नहीं है। ट्रेडमार्क उनके संबंधित स्वामियों की संपत्ति बने रहते हैं। अंतिम उपयुक्तता RFQ के दौरान ड्रॉइंग/स्पेसिफ़िकेशन समीक्षा से पुष्टि की जाती है।