跳到主要內容
CSTONE
RFQ 清單

產品詳情

CA-DMDFH075 — 高 quality fully tested 7 / 16 DIN 公頭 至 7 / 16 DIN 母座 線纜組件 featuring 高 performance 400-Series Ultra Flex coax 線纜. These 線纜 are ideal 用於 indoor or outdoor applications that require maximum flexibility due 至 curves, bends 與 twists. In addition these 線纜 have excellent low loss characteristics.

中國供應鏈相容替代品 — 需透過圖紙/規格審查確認適配性。

料號(MPN)

CA-DMDFH075

阻抗

50 Ω

依圖客製 RF 線纜組件 的量產採購

面向量產的 依圖客製 RF 線纜組件,包含相容性審查、MOQ 建議與成本優化採購支援。

依圖客製 RF 線纜 →
WhatsApp — 快速回覆
交期:3–6 週 | MOQ:200+ 件
RFQ 前 清楚的輸入可加快審查。 ⌄
  • • 若品牌系列很重要,請提供參考 MPN 與來源品牌。
  • • 量產專案請加入 BOM 與數量拆分。
  • • 附上圖紙或關鍵適配要求。

圖片

點擊圖片放大。

產品圖片

CA-DMDFH075 product photo

CA-DMDFH075 product photo

1 / 3

規格

CA-DMDFH075 規格
阻抗50 Ω
阻抗50 Ω
阻抗50 Ω
連接器 1 系列7 / 16 DIN
連接器 1 公母公頭
連接器 1 極性標準
連接器 角 1直式
連接器 2 系列7 / 16 DIN
連接器 2 公母母座
連接器 2 極性標準
連接器 角 2直式
RF 線纜 類型400UF 系列
顯示另外 4 項規格
產品類型同軸 線纜組件
Category 項目同軸 線纜組件
Application 項目RF Voice / Video / Data
Product Features 項目Each 組件 is fully tested ensuring the highest qualit

描述

CA-DMDFH075 目前參考資料:50 Ω。 阻抗列為 50 Ω。若此參數很關鍵,請在 RFQ 中再次確認。 若此處缺少安裝資訊,請依圖紙或配對要求確認。 此頁用於 RFQ 前候選篩選,不作為最終核准依據。

可先用此頁建立 RFQ 前的候選清單。MOQ 200+ 客製生產與供應路徑,會在圖紙/規格/BOM 審查後確認;不預設現貨。

相似連接器

相關型號:

LCCA30346-FT1

L-com's LCCA30346-FT1 is a low loss 7 / 16 DIN 公頭 至 N 公頭 線纜組件 using LMR-600-DB coax, 1 FT 帶 Times Microwave components 與 ships same-day. The LMR-600-DB coax of this 7 / 16 DIN 線纜 uses the PE (F) dielectric 帶 a VoP of 87%, resulting in very low insertion loss compared 至 solid dielectrics. These flexible RF 線纜組件 are ideal 用於 applications where flexure is required. Our L-com 7 / 16 DIN 至 N 線纜組件 has a 公頭 至 公頭 公母 配置 帶 flexible LMR-600-DB 系列 coax 與 operates 至 5.8 GHz. The double 屏蔽 of this 7 / 16 DIN 線纜 is layered by tinned 銅 braid over 鋁 tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7 / 16 DIN 公頭 至 7 / 16 DIN 公頭 線纜, along 帶 the rest of L-com's other RF 組件, can also be built 與 shipped same day. Other available RF 線纜組件 value added services from L-com include 連接器 orientation or clocking, heat shrink booting 與 custom labeling. RF testing can also be performed 至 document the electrical performance of your 線纜組件. 接點 a sales representative 用於 testing or custom RF 線纜 quotes. Part number LCCA30346-FT1 L-com Low Loss 7 / 16 DIN 公頭 至 N 公頭 線纜組件 using LMR-600-DB Coax, 1 FT 帶 Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) 與 dimensions below.

查看詳情 →

LCCA30200-FT3

L-com's LCCA30200-FT3 is a low loss 4.3-10 公頭 至 4.3-10 公頭 線纜組件 using LMR-400-DB coax, 3 FT 帶 Times Microwave components 與 ships same-day. The LMR-400-DB coax of this 4.3-10 線纜 uses the PE (F) dielectric 帶 a VoP of 85%, resulting in very low insertion loss compared 至 solid dielectrics. These flexible RF 線纜組件 are ideal 用於 applications where flexure is required. Our L-com 4.3-10 至 4.3-10 線纜組件 has a 公頭 至 公頭 公母 配置 帶 flexible LMR-400-DB 系列 coax 與 operates 至 6 GHz. The double 屏蔽 of this 4.3-10 線纜 is layered by tinned 銅 braid over 鋁 tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 公頭 至 4.3-10 公頭 線纜, along 帶 the rest of L-com's other RF 組件, can also be built 與 shipped same day. Other available RF 線纜組件 value added services from L-com include 連接器 orientation or clocking, heat shrink booting 與 custom labeling. RF testing can also be performed 至 document the electrical performance of your 線纜組件. 接點 a sales representative 用於 testing or custom RF 線纜 quotes. Part number LCCA30200-FT3 L-com Low Loss 4.3-10 公頭 至 4.3-10 公頭 線纜組件 using LMR-400-DB Coax, 3 FT 帶 Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) 與 dimensions below.

查看詳情 →

T3362-100

Circular DIN 連接器 公頭 插座 5 WAY

查看詳情 →

L717DA15PT

D-Sub 標準連接器 D-SUB, Machined 針腳 7.5A, 直式 PCB 通孔, Cnt Length=4.0 mm (.157in), Cnt =0.6 mm (.024in), 15 針腳, Bright 錫 Shell+Grounding Dimples, Flash 金, 3.1 mm (.122in) Clear Hole, 不帶 Standoff 與 Boardlock

查看詳情 →

2.4-LA-PJ

The 2.4-LA-PJ is an 2.4 mm 直角 轉接器 連接器. This 連接器 is suitable 用於 various 高-frequency applications. It features a impedance 50Ω, operates up 至 50 GHz, 與 has a rated voltage of AC 160V, ensures a 高 insulation resistance (1000MΩ(Min.) at DC 500V), a low 接點 resistance (Between inner conductors: 4 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), 與 an excellent V.S.W.R 1.35(Max.) at DC~50 GHz. The 接點 is made of 鈹銅 / 金 鍍層, while the 本體 is Stainless / Passivate Treatment. We can customize our products 用於 you. We offer total customization, including changes 至 a product's shape, length, 材質, surface treatment, 與 packaging. Available from 1 piece 用於 in-stock items.

查看詳情 →

LCCA30265-FT3

L-com's LCCA30265-FT3 is a low loss 4.3-10 公頭 至 N 公頭 線纜組件 using LMR-240 coax, 3 FT 帶 Times Microwave components 與 ships same-day. The LMR-240 coax of this 4.3-10 線纜 uses the PE (F) dielectric 帶 a VoP of 84%, resulting in very low insertion loss compared 至 solid dielectrics. These flexible RF 線纜組件 are ideal 用於 applications where flexure is required. Our L-com 4.3-10 至 N 線纜組件 has a 公頭 至 公頭 公母 配置 帶 flexible LMR-240 系列 coax 與 operates 至 5.8 GHz. The double 屏蔽 of this 4.3-10 線纜 is layered by tinned 銅 braid over 鋁 tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 公頭 至 4.3-10 公頭 線纜, along 帶 the rest of L-com's other RF 組件, can also be built 與 shipped same day. Other available RF 線纜組件 value added services from L-com include 連接器 orientation or clocking, heat shrink booting 與 custom labeling. RF testing can also be performed 至 document the electrical performance of your 線纜組件. 接點 a sales representative 用於 testing or custom RF 線纜 quotes. Part number LCCA30265-FT3 L-com Low Loss 4.3-10 公頭 至 N 公頭 線纜組件 using LMR-240 Coax, 3 FT 帶 Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) 與 dimensions below.

查看詳情 →
MPN 搜尋 支援精確、前綴與部分匹配。 ⌄

支援精確、前綴與部分匹配。

聲明

製造商名稱、商標、標誌與料號僅用於識別與交叉參照。Cstone Technology 是位於中國的經紀/分銷商與相容替代品出口採購夥伴,與原品牌沒有隸屬關係。商標屬於各自權利人。最終適配性會在 RFQ 階段透過圖紙/規格審查確認。