Detail produk
CA-DMDFH075 — tinggi quality fully tested 7 / 16 DIN male ke 7 / 16 DIN female rakitan kabel featuring tinggi performance 400-Series Ultra Flex coax kabel. These kabel are ideal untuk indoor or outdoor applications that require maximum flexibility due ke curves, bends dan twists. In addition these kabel have excellent low loss characteristics.
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
7 / 16 DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | 400UF seri |
|---|---|
| Antarmuka | 7 / 16 DIN |
| Antarmuka | 7 / 16 DIN |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Female |
| Orientasi | Lurus |
| Orientasi | Lurus |
| Connector 1 Polarity | standar |
| Connector 2 Polarity | standar |
Show 4 more specs
| Jenis produk | koaksial rakitan kabel |
|---|---|
| Category | koaksial rakitan kabel |
| Application | RF Voice / Video / Data |
| Product Features | Each rakitan is fully tested ensuring the highest qualit |
Deskripsi
Data referensi untuk CA-DMDFH075 saat ini mencakup: 7 / 16 DIN · 50 Ohm · Lurus. Katalog saat ini mencantumkan konfigurasi sebagai: Lurus. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
LCCA30346-FT1
L-com's LCCA30346-FT1 is a low loss 7 / 16 DIN male ke N male rakitan kabel using LMR-600-DB coax, 1 FT dengan Times Microwave components dan ships same-day. The LMR-600-DB coax of this 7 / 16 DIN kabel uses the PE (F) dielectric dengan a VoP of 87%, resulting in very low insertion loss compared ke solid dielectrics. These flexible RF rakitan kabel are ideal untuk applications where flexure is required. Our L-com 7 / 16 DIN ke N rakitan kabel has a male ke male gender configuration dengan flexible LMR-600-DB seri coax dan operates ke 5.8 GHz. The double pelindung of this 7 / 16 DIN kabel is layered by tinned tembaga braid over aluminium tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7 / 16 DIN male ke 7 / 16 DIN male kabel, along dengan the rest of L-com's other RF rakitan, can also be built dan shipped same day. Other available RF rakitan kabel value added services from L-com include konektor orientation or clocking, heat shrink booting dan custom labeling. RF testing can also be performed ke document the electrical performance of your rakitan kabel. kontak a sales representative untuk testing or custom RF kabel quotes. Part number LCCA30346-FT1 L-com Low Loss 7 / 16 DIN male ke N male rakitan kabel using LMR-600-DB Coax, 1 FT dengan Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) dan dimensions below.
LCCA30200-FT3
L-com's LCCA30200-FT3 is a low loss 4.3-10 male ke 4.3-10 male rakitan kabel using LMR-400-DB coax, 3 FT dengan Times Microwave components dan ships same-day. The LMR-400-DB coax of this 4.3-10 kabel uses the PE (F) dielectric dengan a VoP of 85%, resulting in very low insertion loss compared ke solid dielectrics. These flexible RF rakitan kabel are ideal untuk applications where flexure is required. Our L-com 4.3-10 ke 4.3-10 rakitan kabel has a male ke male gender configuration dengan flexible LMR-400-DB seri coax dan operates ke 6 GHz. The double pelindung of this 4.3-10 kabel is layered by tinned tembaga braid over aluminium tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male ke 4.3-10 male kabel, along dengan the rest of L-com's other RF rakitan, can also be built dan shipped same day. Other available RF rakitan kabel value added services from L-com include konektor orientation or clocking, heat shrink booting dan custom labeling. RF testing can also be performed ke document the electrical performance of your rakitan kabel. kontak a sales representative untuk testing or custom RF kabel quotes. Part number LCCA30200-FT3 L-com Low Loss 4.3-10 male ke 4.3-10 male rakitan kabel using LMR-400-DB Coax, 3 FT dengan Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) dan dimensions below.
T3362-100
Circular DIN konektor male receptacle 5 WAY
L717DA15PT
konektor D-Sub standar D-SUB, Machined pin 7.5A, lurus PCB through-hole, Cnt Length=4.0 mm (.157in), Cnt =0.6 mm (.024in), 15 pin, Bright timah Shell+Grounding Dimples, Flash emas, 3.1 mm (.122in) Clear Hole, tanpa Standoff dan Boardlock
2.4-LA-PJ
The 2.4-LA-PJ is an 2.4 mm sudut siku adaptor konektor. This konektor is suitable untuk various tinggi-frequency applications. It features a impedance 50Ω, operates up ke 50 GHz, dan has a rated voltage of AC 160V, ensures a tinggi insulation resistance (1000MΩ(Min.) at DC 500V), a low kontak resistance (Between inner conductors: 4 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), dan an excellent V.S.W.R 1.35(Max.) at DC~50 GHz. The kontak is made of tembaga berilium / emas Plating, while the body is Stainless / Passivate Treatment. We can customize our products untuk you. We offer total customization, including changes ke a product's shape, length, material, surface treatment, dan packaging. Available from 1 piece untuk in-stock items.
LCCA30265-FT3
L-com's LCCA30265-FT3 is a low loss 4.3-10 male ke N male rakitan kabel using LMR-240 coax, 3 FT dengan Times Microwave components dan ships same-day. The LMR-240 coax of this 4.3-10 kabel uses the PE (F) dielectric dengan a VoP of 84%, resulting in very low insertion loss compared ke solid dielectrics. These flexible RF rakitan kabel are ideal untuk applications where flexure is required. Our L-com 4.3-10 ke N rakitan kabel has a male ke male gender configuration dengan flexible LMR-240 seri coax dan operates ke 5.8 GHz. The double pelindung of this 4.3-10 kabel is layered by tinned tembaga braid over aluminium tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male ke 4.3-10 male kabel, along dengan the rest of L-com's other RF rakitan, can also be built dan shipped same day. Other available RF rakitan kabel value added services from L-com include konektor orientation or clocking, heat shrink booting dan custom labeling. RF testing can also be performed ke document the electrical performance of your rakitan kabel. kontak a sales representative untuk testing or custom RF kabel quotes. Part number LCCA30265-FT3 L-com Low Loss 4.3-10 male ke N male rakitan kabel using LMR-240 Coax, 3 FT dengan Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) dan dimensions below.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Cstone adalah pabrik profesional, bukan perusahaan dagang, untuk konektor RF dan koaksial, adaptor, serta rakitan kabel termasuk N-type, BNC, SMA, SMP, SSMB, dan MMCX. Kami memproduksi konektor berdasarkan gambar 2D atau sampel; kesesuaian, MOQ, waktu pengiriman, dan detail produksi dikonfirmasi melalui RFQ. Cstone Technology tidak berafiliasi dengan merek asli. Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.