產品詳情
The AXA-PDMDM adapter is ideal for used with Distributed Antenna Systems (DAS) do to its excellent Passive InterModulation (PIM) performance of -160dBc. This adapter features a 7/16 DIN Male to 7/16 DIN Male interface. For additional information and complete specifications, see the 2D Drawing in Downloads section.
料號（MPN）
阻抗
50 Ohm
頻率
DC
介面
7/16 DIN
依圖客製 RF 線纜組件 的量產採購
面向量產的 依圖客製 RF 線纜組件，包含相容性審查、MOQ 建議與成本優化採購支援。
圖片
點擊圖片放大。
規格
| 介面 | Coaxial Adapters |
|---|---|
| 介面 | 7/16 DIN |
| 介面 | 7/16 DIN |
| 阻抗 | 50 Ohm |
| 阻抗 | 50 Ohm |
| 最高頻率 | DC |
| 最高頻率 | 3 GHz |
| 公母 | Male |
| 公母 | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
顯示另外 9 項規格
| Connector Body Plating 1 | Tri-Metal |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| 安裝方式 | None |
| 安裝方式 | None |
| Category | Coaxial Adapters |
| Application | Distributed antenna systems (DAS); IEEE 802.11b and 802.11g Wireless LAN applications; Low PIM coax cable assemblies; Low-loss coax; Coaxial extension |
| Product Features | Plated brass body ideal for outdoor use; Excellent Passive InterModulation performance of -160dBc |
描述
AXA-PDMDM 目前參考資料：7/16 DIN · 50 Ohm · DC。 阻抗列為 50 Ohm。若此參數很關鍵，請在 RFQ 中再次確認。 頻率列為 DC。實際工作上限仍取決於組裝、配對件與應用情境。 若此處缺少安裝資訊，請依圖紙或配對要求確認。 材料列為 Brass。這有助於審查，但不能取代對完整專案結構與材料配置的確認。 此頁用於 RFQ 前候選篩選，不作為最終核准依據。
可先用此頁建立 RFQ 前的候選清單。MOQ 200+ 客製生產與供應路徑，會在圖紙/規格/BOM 審查後確認；不預設現貨。
相似連接器
相關型號：
C091-31H014-201-2
Circular DIN 連接器 M16 M 線纜 連接器 14 CTC 6-8 mm 線纜 DIA
LCCA30191-FT2
L-com's LCCA30191-FT2 is a low loss N male to N male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30191-FT2 L-com Low Loss N Male to N Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
TC-SPP250-716M-LP
7 / 16 DIN 公頭 (插頭) Low PIM 連接器 用於 SPP-250-LLPL, SPO-250, SPF-250 線纜, 焊接
PE3C7839
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low PIM Cable Using 1/4 inch Superflexible Coax
1210640108
Circular DIN 連接器 S022 PG09 TRANSPARENT PROFILE GASKET
LCCA30219-FT6
L-com's LCCA30219-FT6 is a low loss N male to N male cable assembly using LMR-600-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT6 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
聲明
製造商名稱、商標、標誌與料號僅用於識別與交叉參照。Cstone Technology 是位於中國的經紀/分銷商與相容替代品出口採購夥伴，與原品牌沒有隸屬關係。商標屬於各自權利人。最終適配性會在 RFQ 階段透過圖紙/規格審查確認。