Szczegóły produktu
The AXA-PDMDM adapter is ideal for used with Distributed Antenna Systems (DAS) do to its excellent Passive InterModulation (PIM) performance of -160dBc. This adapter features a 7/16 DIN Male to 7/16 DIN Male interface. For additional information and complete specifications, see the 2D Drawing in Downloads section.
Numer części (MPN)
Impedancja
50 Ohm
Częstotliwość
DC
Interfejs
7/16 DIN
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Coaxial Adapters |
|---|---|
| Interfejs | 7/16 DIN |
| Interfejs | 7/16 DIN |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Częstotliwość (maks.) | DC |
| Częstotliwość (maks.) | 3 GHz |
| Płeć | Male |
| Płeć | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 9 more specs
| Connector Body Plating 1 | Tri-Metal |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Montaż | None |
| Montaż | None |
| Category | Coaxial Adapters |
| Application | Distributed antenna systems (DAS); IEEE 802.11b and 802.11g Wireless LAN applications; Low PIM coax cable assemblies; Low-loss coax; Coaxial extension |
| Product Features | Plated brass body ideal for outdoor use; Excellent Passive InterModulation performance of -160dBc |
Opis
Aktualne dane referencyjne dla AXA-PDMDM: 7/16 DIN · 50 Ohm · DC. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Częstotliwość jest podana jako DC. Rzeczywisty limit pracy zależy od zespołu, elementu współpracującego i warunków zastosowania. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
C091-31H014-201-2
Circular DIN złącza M16 M kabel złącze 14 CTC 6-8 mm kabel DIA
LCCA30191-FT2
L-com's LCCA30191-FT2 is a low loss N male to N male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30191-FT2 L-com Low Loss N Male to N Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
TC-SPP250-716M-LP
7/16 DIN Male (Plug) Low PIM Connector for SPP-250-LLPL, SPO-250, SPF-250 Cable, Solder
PE3C7839
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low PIM Cable Using 1/4 inch Superflexible Coax
1210640108
Circular DIN złącza S022 PG09 TRANSPARENT PROFILE GASKET
LCCA30219-FT6
L-com's LCCA30219-FT6 is a low loss N male to N male cable assembly using LMR-600-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT6 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Cstone Technology to chiński partner eksportowy oferujący kompatybilne alternatywy i nie jest powiązany z oryginalnymi markami. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.