Chi tiết sản phẩm
Low PIM 7 / 16 DIN cái đến 7 / 16 DIN cái bộ chuyển đổi, Low VSWR
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Tần số
DC
Giao diện
7 / 16 DIN
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | 7 / 16 DIN |
|---|---|
| Giao diện | 7 / 16 DIN |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Tần số (tối đa) | DC |
| Tần số (tối đa) | 8 GHz |
| Giới tính đầu nối | Cái |
| Giới tính đầu nối | Cái |
| Adapter Body Style | Thẳng |
| Connector Polarity 1 | tiêu chuẩn |
| Connector Polarity 2 | tiêu chuẩn |
| Kiểu lắp | None |
Show 3 more specs
| Kiểu lắp | None |
|---|---|
| Loại sản phẩm | bộ chuyển đổi |
| Category | bộ chuyển đổi |
Mô tả
Dữ liệu tham chiếu hiện có cho PE91029: 7 / 16 DIN · 50 Ohm · DC. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Tần số được ghi là DC. Giới hạn vận hành thực tế vẫn phụ thuộc vào cụm lắp ráp, đầu ghép nối và bối cảnh ứng dụng. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
LMR-400-LC
LMR-400-LC coax cáp from L-com is only one of a large number of radio frequency đồng trục cáp types specifically stocked đến be ready cho quick shipment. L-com Microwave LMR-400-LC coax cáp is manufactured in a flexible design và has a 50 Ω impedance. This low loss flexible 50 Ω coax cáp LMR-400-LC is constructed với a 0.405 inch diameter và Black PE jacket. LMR-400-LC flexible 50 Ω coax cáp với PE jacket is rated cho a 8 GHz maximum operating frequency. This 50 Ω 0.405 inch diameter và low loss flexible coax cáp is built với a double chắn số lượng và RF shielding of 90 dB. L-com Microwave LMR-400-LC coax is constructed với PE (F) dielectric và a maximum operating temperature of 85 degrees C. Times Microwave LMR-400-LC coax cáp specs cho this wire properties can be found on its RF coax cáp LMR-400-LC datasheet. LMR-400-LC cáp is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-400-LC coax cáp is ready đến buy và can be shipped worldwide. L-com also maintains a wide selection of other radio frequency đồng trục cáp types that ship same-day from our warehouse as với the rest of our other RF / microwave components. * LMR™ is a trademark of Times Microwave Systems.
LCCA30269-FT4
L-com's LCCA30269-FT4 is a low loss 4.3-10 đực đến N cái bulkhead Cụm cáp using LMR-240 coax, 4 FT với Times Microwave components và ships same-day. The LMR-240 coax of this 4.3-10 cáp uses the PE (F) dielectric với a VoP of 84%, resulting in very low insertion loss compared đến solid dielectrics. These flexible RF Cụm cáp are ideal cho applications where flexure is required. Our L-com 4.3-10 đến N Cụm cáp has a đực đến cái giới tính configuration với flexible LMR-240 dòng coax và operates đến 5.8 GHz. The double chắn of this 4.3-10 cáp is layered by tinned đồng braid over nhôm tape providing shielding effectiveness greater than 90dB. L-com's RF Cụm cáp với N bulkhead interface enables system designers đến have external connections on their product enclosures or đến be used cho other rack lắp và Gắn bảng applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 đực đến 4.3-10 cái cáp, along với the rest of L-com's other RF cụm, can also be built và shipped same day. Other available RF Cụm cáp value added services from L-com include đầu nối orientation or clocking, heat shrink booting và custom labeling. RF testing can also be performed đến document the electrical performance of your Cụm cáp. tiếp điểm a sales representative cho testing or custom RF cáp quotes. Part number LCCA30269-FT4 L-com Low Loss 4.3-10 đực đến N cái Bulkhead Cụm cáp using LMR-240 Coax, 4 FT với Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) và dimensions below.
L717TWA7W2PESV4RRM6
Đầu nối D-Sub tiếp điểm hỗn hợp D-SUB, Machined Hybrid, 7W2, Signal (7.5A) tiếp điểm Only, chân, Góc vuông PCB Xuyên lỗ European Footprint, Bright thiếc Shell+Grounding Dimples, 0.38 m (15 in) Signal, S=10.30 mm (.406in), 4-40 Threaded Rear Nut, với Bracket và Boardlock
LCCA30205-FT2
L-com's LCCA30205-FT2 is a low loss N đực đến N cái bulkhead Cụm cáp using LMR-400-DB coax, 2 FT với Times Microwave components và ships same-day. The LMR-400-DB coax of this N cáp uses the PE (F) dielectric với a VoP of 85%, resulting in very low insertion loss compared đến solid dielectrics. These flexible RF Cụm cáp are ideal cho applications where flexure is required. Our L-com N đến N Cụm cáp has a đực đến cái giới tính configuration với flexible LMR-400-DB dòng coax và operates đến 6 GHz. The double chắn of this N cáp is layered by tinned đồng braid over nhôm tape providing shielding effectiveness greater than 90dB. L-com's RF Cụm cáp với N bulkhead interface enables system designers đến have external connections on their product enclosures or đến be used cho other rack lắp và Gắn bảng applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N đực đến N cái cáp, along với the rest of L-com's other RF cụm, can also be built và shipped same day. Other available RF Cụm cáp value added services from L-com include đầu nối orientation or clocking, heat shrink booting và custom labeling. RF testing can also be performed đến document the electrical performance of your Cụm cáp. tiếp điểm a sales representative cho testing or custom RF cáp quotes. Part number LCCA30205-FT2 L-com Low Loss N đực đến N cái Bulkhead Cụm cáp using LMR-400-DB Coax, 2 FT với Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) và dimensions below.
LCCA30341-FT4
L-com's LCCA30341-FT4 is a low loss 4.3-10 đực đến N cái bulkhead Cụm cáp using LMR-600 coax, 4 FT với Times Microwave components và ships same-day. The LMR-600 coax of this 4.3-10 cáp uses the PE (F) dielectric với a VoP of 87%, resulting in very low insertion loss compared đến solid dielectrics. These flexible RF Cụm cáp are ideal cho applications where flexure is required. Our L-com 4.3-10 đến N Cụm cáp has a đực đến cái giới tính configuration với flexible LMR-600 dòng coax và operates đến 5.8 GHz. The double chắn of this 4.3-10 cáp is layered by tinned đồng braid over nhôm tape providing shielding effectiveness greater than 90dB. L-com's RF Cụm cáp với N bulkhead interface enables system designers đến have external connections on their product enclosures or đến be used cho other rack lắp và Gắn bảng applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 đực đến 4.3-10 cái cáp, along với the rest of L-com's other RF cụm, can also be built và shipped same day. Other available RF Cụm cáp value added services from L-com include đầu nối orientation or clocking, heat shrink booting và custom labeling. RF testing can also be performed đến document the electrical performance of your Cụm cáp. tiếp điểm a sales representative cho testing or custom RF cáp quotes. Part number LCCA30341-FT4 L-com Low Loss 4.3-10 đực đến N cái Bulkhead Cụm cáp using LMR-600 Coax, 4 FT với Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) và dimensions below.
T 3374 501
Circular DIN đầu nối 5P cáp phích cắm SODR SILV BAYONET
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.