Produktdetails
Low PIM 7/16 DIN weiblich zu 7/16 DIN weiblich Adapter, Low VSWR
Teilenummer (MPN)
Impedanz
50 Ohm
Frequenz
DC
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Impedanz | 50 Ohm |
|---|---|
| Impedanz | 50 Ohm |
| Frequenz (max) | DC |
| Frequenz (max) | 8 GHz |
| Adapter Body Style | Gerade |
| Steckverbinder Serie 1 | 7/16 DIN |
| Steckverbinder Geschlecht 1 | weiblich |
| Steckverbinder Polarität 1 | Standard |
| Steckverbinder Serie 2 | 7/16 DIN |
| Steckverbinder Geschlecht 2 | weiblich |
| Steckverbinder Polarität 2 | Standard |
| Steckverbinder Montage Method 1 | None |
Show 3 more specs
| Steckverbinder Montage Method 2 | None |
|---|---|
| Produkttyp | Adapter |
| Category | Adapter |
Beschreibung
Aktuelle Referenzdaten für PE91029: 50 Ohm · DC. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Die Frequenz ist als DC angegeben. Die reale Betriebsgrenze hängt weiterhin von Baugruppe, Gegenstück und Einsatzumfeld ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LMR-400-LC
LMR-400-LC coax Kabel from L-com is only one of a large number of radio frequency koaxial Kabel types specifically stocked zu be ready für quick shipment. L-com Microwave LMR-400-LC coax Kabel is manufactured in a flexible design und has a 50 Ω impedance. This low loss flexible 50 Ω coax Kabel LMR-400-LC is constructed mit a 0.405 inch diameter und Black PE jacket. LMR-400-LC flexible 50 Ω coax Kabel mit PE jacket is rated für a 8 GHz maximum operating frequency. This 50 Ω 0.405 inch diameter und low loss flexible coax Kabel is built mit a double shield Anzahl und RF shielding of 90 dB. L-com Microwave LMR-400-LC coax is constructed mit PE (F) dielectric und a maximum operating temperature of 85 degrees C. Times Microwave LMR-400-LC coax Kabel specs für this wire properties can be found on its RF coax Kabel LMR-400-LC datasheet. LMR-400-LC Kabel is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-400-LC coax Kabel is ready zu buy und can be shipped worldwide. L-com also maintains a wide selection of other radio frequency koaxial Kabel types that ship same-day from our warehouse as mit the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
LCCA30269-FT4
L-com's LCCA30269-FT4 is a low loss 4.3-10 männlich zu N weiblich bulkhead Kabelkonfektion using LMR-240 coax, 4 FT mit Times Microwave components und ships same-day. The LMR-240 coax of this 4.3-10 Kabel uses the PE (F) dielectric mit a VoP of 84%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com 4.3-10 zu N Kabelkonfektion has a männlich zu weiblich Geschlecht configuration mit flexible LMR-240 Serie coax und operates zu 5.8 GHz. The double shield of this 4.3-10 Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. L-com's RF Kabelkonfektion mit N bulkhead interface enables system designers zu have external connections on their product enclosures or zu be used für other rack Montage und Panelmontage applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 männlich zu 4.3-10 weiblich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30269-FT4 L-com Low Loss 4.3-10 männlich zu N weiblich Bulkhead Kabelkonfektion using LMR-240 Coax, 4 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.
L717TWA7W2PESV4RRM6
D-Sub-Steckverbinder mit Mischkontakten D-SUB, Machined Hybrid, 7W2, Signal (7.5A) Kontakte Only, Kontakt, abgewinkelt PCB Durchsteckmontage European Footprint, Bright Zinn Shell+Grounding Dimples, 0.38 m (15 in) Signal, S=10.30 mm (.406in), 4-40 Threaded Rear Nut, mit Bracket und Boardlock
LCCA30205-FT2
L-com's LCCA30205-FT2 is a low loss N männlich zu N weiblich bulkhead Kabelkonfektion using LMR-400-DB coax, 2 FT mit Times Microwave components und ships same-day. The LMR-400-DB coax of this N Kabel uses the PE (F) dielectric mit a VoP of 85%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com N zu N Kabelkonfektion has a männlich zu weiblich Geschlecht configuration mit flexible LMR-400-DB Serie coax und operates zu 6 GHz. The double shield of this N Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. L-com's RF Kabelkonfektion mit N bulkhead interface enables system designers zu have external connections on their product enclosures or zu be used für other rack Montage und Panelmontage applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N männlich zu N weiblich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30205-FT2 L-com Low Loss N männlich zu N weiblich Bulkhead Kabelkonfektion using LMR-400-DB Coax, 2 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.
LCCA30341-FT4
L-com's LCCA30341-FT4 is a low loss 4.3-10 männlich zu N weiblich bulkhead Kabelkonfektion using LMR-600 coax, 4 FT mit Times Microwave components und ships same-day. The LMR-600 coax of this 4.3-10 Kabel uses the PE (F) dielectric mit a VoP of 87%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com 4.3-10 zu N Kabelkonfektion has a männlich zu weiblich Geschlecht configuration mit flexible LMR-600 Serie coax und operates zu 5.8 GHz. The double shield of this 4.3-10 Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. L-com's RF Kabelkonfektion mit N bulkhead interface enables system designers zu have external connections on their product enclosures or zu be used für other rack Montage und Panelmontage applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 männlich zu 4.3-10 weiblich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30341-FT4 L-com Low Loss 4.3-10 männlich zu N weiblich Bulkhead Kabelkonfektion using LMR-600 Coax, 4 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.
T 3374 501
Circular DIN Steckverbinder 5P Kabel Stecker SODR SILV BAYONET
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.