Chi tiết sản phẩm
4.1/9.5 Mini DIN Male to 4.3-10 Male Right Angle Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Mã linh kiện (MPN)
Trở kháng
50 Ohm
Giao diện
4.1/9.5 Mini DIN
cụm cáp RF tùy chỉnh từ bản vẽ cho sourcing sản xuất
cụm cáp RF tùy chỉnh từ bản vẽ định hướng sản xuất với review tương thích, hướng dẫn MOQ và hỗ trợ sourcing giảm chi phí.
Chuẩn bị gì trước khi gửi RFQ Dữ liệu đầu vào rõ ràng giảm phỏng đoán và tăng tốc phản hồi hữu ích. ⌄
- • Chia sẻ MPN tham chiếu, linh kiện ghép nối hoặc thương hiệu gốc nếu liên quan đến việc rà soát.
- • Thêm BOM, phân bổ số lượng và nhu cầu hằng năm nếu dự án vượt giai đoạn mẫu thử.
- • Đính kèm bản vẽ, bảng dữ liệu hoặc yêu cầu quan trọng về trở kháng, tần số, lắp đặt và mạ.
Hình ảnh
Bấm để phóng to.
Specifications
| Giao diện | Cable Assemblies |
|---|---|
| Giao diện | TFT-402 |
| Giao diện | 4.1/9.5 Mini DIN |
| Giao diện | 4.3-10 |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Trở kháng | 50 Ohm |
| Giới tính đầu nối | Male |
| Giới tính đầu nối | Male |
| Hướng | Straight |
| Hướng | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Kiểu lắp | None |
|---|---|
| Connector Polarity 2 | Standard |
| Kiểu lắp | None |
| Loại cáp | TFT-402 |
| Category | Cable Assemblies |
Mô tả
Dữ liệu tham chiếu hiện có cho PE3C8227: 4.1/9.5 Mini DIN · 50 Ohm · Straight. Danh mục hiện ghi cấu hình là: Straight. Trở kháng được ghi là 50 Ohm. Nếu đây là thông số quan trọng, hãy xác nhận lại trong RFQ. Nếu thiếu thông tin lắp đặt tại đây, hãy xác nhận theo bản vẽ hoặc yêu cầu ghép nối. Trang này dùng để lọc sơ bộ trước RFQ, không phải căn cứ phê duyệt cuối cùng.
Dùng trang này để lọc ứng viên trước RFQ. Chuỗi cung ứng và lộ trình sản xuất tùy chỉnh MOQ 200+ được xác nhận sau khi rà soát bản vẽ/thông số/BOM.
Đầu nối tương tự
Bạn cũng có thể quan tâm đến các model này:
LCCA30352-FT1.5
L-com's LCCA30352-FT1.5 is a low loss 4.3-10 male to N female cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30352-FT1.5 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
T3524-548
Circular DIN đầu nối M Cbl đầu nối, vàng Plt 8P, Cbl dia 4-6 mm
CA-DMDMH125
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
FMCA2455
Low PIM 7/16 DIN Male to RA N Male Cable TFT-402 Coax Using Times Microwave Components
LMR-195-LLPL
LMR-195-LLPL coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-195-LLPL coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-195-LLPL is constructed with a 0.195 inch diameter and Orange PVC (FR) jacket. LMR-195-LLPL flexible 50 Ohm coax cable with PVC (FR) jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-195-LLPL coax is constructed with PTFE (LD) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-195-LLPL coax cable specs for this wire properties can be found on its RF coax cable LMR-195-LLPL datasheet. LMR-195-LLPL cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-195-LLPL coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
TC-195-NMH-RA-D-LC
L-com's N Male connector for LMR-195, LMR-195-DB, LMR-195-FR and 195-Series coax uses a Crimp/Solder attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for TC-195-NMH-RA-D-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
Tìm MPN Hỗ trợ khớp chính xác, tiền tố và một phần. ⌄
Tuyên bố miễn trừ
Cstone là nhà máy chuyên nghiệp, không phải công ty thương mại, sản xuất đầu nối RF và đồng trục, adapter và cụm cáp gồm N-type, BNC, SMA, SMP, SSMB và MMCX. Chúng tôi sản xuất đầu nối theo bản vẽ 2D hoặc mẫu; độ phù hợp, MOQ, thời gian giao hàng và chi tiết sản xuất được xác nhận qua RFQ. Cstone Technology không liên kết với các thương hiệu gốc. Tên nhà sản xuất, thương hiệu, biểu tượng và số linh kiện chỉ được sử dụng để nhận dạng và đối chiếu. Thương hiệu vẫn thuộc về chủ sở hữu tương ứng. Sự phù hợp cuối cùng được xác nhận qua kiểm tra bản vẽ/thông số kỹ thuật trong quá trình RFQ.