Detalles del producto
4.1/9.5 Mini DIN Male to 4.3-10 Male Right Angle Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
Número de parte (MPN)
Impedancia
50 Ohm
Interfaz
4.1/9.5 Mini DIN
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Cable Assemblies |
|---|---|
| Interfaz | TFT-402 |
| Interfaz | 4.1/9.5 Mini DIN |
| Interfaz | 4.3-10 |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Género | Male |
| Género | Male |
| Orientación | Straight |
| Orientación | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montaje | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montaje | None |
| Tipo de cable | TFT-402 |
| Category | Cable Assemblies |
Descripción
Los datos de referencia para PE3C8227 incluyen actualmente: 4.1/9.5 Mini DIN · 50 Ohm · Straight. El catálogo muestra actualmente la configuración como: Straight. La impedancia se indica como 50 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30352-FT1.5
L-com's LCCA30352-FT1.5 is a low loss 4.3-10 male to N female cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30352-FT1.5 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
T3524-548
Circular DIN conectores M Cbl conector oro Plt 8P Cbl dia 4-6 mm
CA-DMDMH125
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
FMCA2455
Low PIM 7/16 DIN Male to RA N Male Cable TFT-402 Coax Using Times Microwave Components
LMR-195-LLPL
LMR-195-LLPL coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-195-LLPL coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-195-LLPL is constructed with a 0.195 inch diameter and Orange PVC (FR) jacket. LMR-195-LLPL flexible 50 Ohm coax cable with PVC (FR) jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-195-LLPL coax is constructed with PTFE (LD) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-195-LLPL coax cable specs for this wire properties can be found on its RF coax cable LMR-195-LLPL datasheet. LMR-195-LLPL cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-195-LLPL coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
TC-195-NMH-RA-D-LC
L-com's N Male connector for LMR-195, LMR-195-DB, LMR-195-FR and 195-Series coax uses a Crimp/Solder attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for TC-195-NMH-RA-D-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.