Деталі виробу
4.1/9.5 Mini DIN Male to 7/16 DIN Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Номер деталі (MPN)
Імпеданс
50 Ohm
Інтерфейс
4.1/9.5 Mini DIN
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Cable Assemblies |
|---|---|
| Інтерфейс | TFT-5G-402 |
| Інтерфейс | 4.1/9.5 Mini DIN |
| Інтерфейс | 7/16 DIN |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Тип конектора | Male |
| Тип конектора | Male |
| Орієнтація | Straight |
| Орієнтація | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Монтаж | None |
|---|---|
| Connector Polarity 2 | Standard |
| Монтаж | None |
| Тип кабелю | TFT-5G-402 |
| Category | Cable Assemblies |
Опис
Поточні довідкові дані для PE3C8288: 4.1/9.5 Mini DIN · 50 Ohm · Straight. У каталозі конфігурацію вказано як: Straight. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Якщо монтаж тут не вказано, підтвердьте його з креслення або вимог до з’єднання. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
173112-0619
D-Sub контакти FCT TERM HFREQ кутовий PC розетка 50 Ω DIN
LCCA30337-FT2
L-com's LCCA30337-FT2 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 2 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT2 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31W105 100 2
Circular DIN роз'єми чоловічий recpt 5 контакт; Front MT
LCCA30188-FT1
L-com's LCCA30188-FT1 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400 coax, 1 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30188-FT1 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMAD1169
Low PIM 7/16 DIN Male (Plug) to 4.3-10 Female (Jack) Adapter, Tri-Metal Plated Brass Body, High Temp, 1.25 VSWR
T3394-551
Circular DIN роз'єми чоловічий кабель роз'єм 5 WAY обтиск
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Cstone — професійна фабрика, а не торговельна компанія, що виробляє RF- і коаксіальні роз’єми, адаптери та кабельні збірки, зокрема N-type, BNC, SMA, SMP, SSMB і MMCX. Виготовляємо роз’єми за 2D-кресленнями або зразками; сумісність, MOQ, термін постачання та деталі виробництва підтверджуємо через RFQ. Cstone Technology не пов’язана з оригінальними брендами. Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.