Butiran produk
4.1/9.5 Mini DIN Male to 7/16 DIN Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Nombor bahagian (MPN)
Impedans
50 Ohm
Antara muka
4.1/9.5 Mini DIN
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Cable Assemblies |
|---|---|
| Antara muka | TFT-5G-402 |
| Antara muka | 4.1/9.5 Mini DIN |
| Antara muka | 7/16 DIN |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Jantina penyambung | Male |
| Jantina penyambung | Male |
| Orientasi | Straight |
| Orientasi | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | TFT-5G-402 |
| Category | Cable Assemblies |
Penerangan
Data rujukan semasa untuk PE3C8288: 4.1/9.5 Mini DIN · 50 Ohm · Straight. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
173112-0619
kontak D-Sub FCT TERM HFREQ sudut siku PC receptacle 50 Ω DIN
LCCA30337-FT2
L-com's LCCA30337-FT2 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 2 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT2 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091 31W105 100 2
Circular DIN konektor male receptacle 5 pin; Front MT
LCCA30188-FT1
L-com's LCCA30188-FT1 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400 coax, 1 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30188-FT1 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMAD1169
Low PIM 7/16 DIN Male (Plug) to 4.3-10 Female (Jack) Adapter, Tri-Metal Plated Brass Body, High Temp, 1.25 VSWR
T3394-551
Circular DIN konektor male kabel konektor 5 WAY crimp
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.