Деталі виробу
4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Номер деталі (MPN)
Імпеданс
50 Ohm
Інтерфейс
4.1/9.5 Mini DIN
custom RF cable assembly за кресленням для production sourcing
custom RF cable assembly за кресленням для production-oriented sourcing з перевіркою сумісності, MOQ guidance і cost-down підтримкою.
Що підготувати до RFQ Чіткі вхідні дані зменшують здогадки та прискорюють корисну відповідь. ⌄
- • Поділіться референсним MPN, відповідною деталлю або вихідним брендом, якщо це важливо для перевірки.
- • Додайте BOM, розбивку кількості та річний попит, якщо проєкт виходить за межі прототипу.
- • Прикладіть креслення, даташит або критичні вимоги щодо імпедансу, частоти, монтажу та покриття.
Зображення
Натисніть, щоб збільшити.
Specifications
| Інтерфейс | Cable Assemblies |
|---|---|
| Інтерфейс | TFT-5G-402 |
| Інтерфейс | 4.1/9.5 Mini DIN |
| Інтерфейс | 4.1/9.5 Mini DIN |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Імпеданс | 50 Ohm |
| Тип конектора | Male |
| Тип конектора | Male |
| Орієнтація | Straight |
| Орієнтація | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Copper Clad Aluminum |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Тип кабелю | TFT-5G-402 |
| Category | Cable Assemblies |
Опис
Поточні довідкові дані для PE3C7982: 4.1/9.5 Mini DIN · 50 Ohm · Straight. У каталозі конфігурацію вказано як: Straight. Імпеданс указано як 50 Ohm. Якщо цей параметр критичний, підтвердьте його ще раз у RFQ. Якщо монтаж тут не вказано, підтвердьте його з креслення або вимог до з’єднання. Матеріал указано як Brass. Це допомагає перевірці, але не замінює підтвердження повної конструкції проєкту. Використовуйте цю сторінку для попереднього відбору перед RFQ, а не як остаточне схвалення.
Використовуйте цю сторінку для попереднього відбору перед RFQ. Шлях постачання і маршрут кастомного виробництва MOQ 200+ підтверджуються після перевірки креслення/специфікації/BOM.
Подібні з’єднувачі
Вас також можуть зацікавити ці моделі:
4850.24
Circular DIN роз'єми DIN розетка 4POLE панельний монтаж
MD-30SMK
DIN роз'єми Mini Din роз'єми
LCCA30286-FT1
L-com's LCCA30286-FT1 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-240-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30286-FT1 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-240-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30202-FT6
L-com's LCCA30202-FT6 is a low loss N male to N male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT6 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
22510134
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
LCCA30351-FT1
L-com's LCCA30351-FT1 is a low loss 4.3-10 male to N male right angle cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30351-FT1 L-com Low Loss 4.3-10 Male to N Male Right Angle Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Пошук MPN Підтримуються точний, префіксний і частковий збіг. ⌄
Застереження
Назви виробників, торговельні марки, символи та номери деталей використовуються виключно для ідентифікації та перехресного посилання. Cstone Technology — це китайський партнер з експортного постачання сумісних альтернатив і не пов’язана з оригінальними брендами. Торговельні марки залишаються власністю відповідних власників. Остаточна придатність підтверджується перевіркою креслення/специфікації під час RFQ.