Detail produk
4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
4.1/9.5 Mini DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | TFT-5G-402 |
| Antarmuka | 4.1/9.5 Mini DIN |
| Antarmuka | 4.1/9.5 Mini DIN |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Male |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Copper Clad Aluminum |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Jenis kabel | TFT-5G-402 |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE3C7982 saat ini mencakup: 4.1/9.5 Mini DIN · 50 Ohm · Straight. Katalog saat ini mencantumkan konfigurasi sebagai: Straight. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Material tercantum sebagai Brass. Ini membantu peninjauan, tetapi tidak menggantikan konfirmasi struktur proyek secara penuh. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
4850.24
Circular DIN konektor DIN soket 4POLE mounting panel
MD-30SMK
DIN konektor Mini Din konektor
LCCA30286-FT1
L-com's LCCA30286-FT1 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-240-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30286-FT1 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-240-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30202-FT6
L-com's LCCA30202-FT6 is a low loss N male to N male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT6 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
22510134
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
LCCA30351-FT1
L-com's LCCA30351-FT1 is a low loss 4.3-10 male to N male right angle cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30351-FT1 L-com Low Loss 4.3-10 Male to N Male Right Angle Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Cstone Technology adalah mitra pengadaan ekspor berbasis di Tiongkok untuk alternatif yang kompatibel dan tidak berafiliasi dengan merek asli. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.