Ürün detayları
4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Female Low PIM Cable Using 1/4 inch Superflexible Coax
Parça numarası (MPN)
Empedans
50 Ohm
Arayüz
4.1/9.5 Mini DIN
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | Cable Assemblies |
|---|---|
| Arayüz | 1/4" Superflexible |
| Arayüz | 4.1/9.5 Mini DIN |
| Arayüz | 4.1/9.5 Mini DIN |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Cinsiyet | Male |
| Cinsiyet | Female |
| Yön | Right Angle |
| Yön | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montaj | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montaj | None |
| Kablo tipi | PE-1/4SFHC |
| Category | Cable Assemblies |
Açıklama
PE3C7824 için mevcut referans verileri: 4.1/9.5 Mini DIN · 50 Ohm · Right Angle. Katalogdaki yapılandırma şu şekilde listeleniyor: Right Angle. Empedans 50 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
PE3C5873
Plenum 7/16 DIN Male to QMA Male Right Angle Low PIM Cable Using SPP-250-LLPL Coax , LF Solder
LCCA30221-FT10
L-com's LCCA30221-FT10 is a low loss N male to N female cable assembly using LMR-600-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30221-FT10 L-com Low Loss N Male to N Female Cable Assembly using LMR-600-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE91255
4.1/9.5 Mini DIN Female to N Female Adapter, IP67 UnMated
LCCA30350-FT3
L-com's LCCA30350-FT3 is a low loss 4.3-10 male to N male cable assembly using LMR-600-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30350-FT3 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
550T039M3CCH1-04B
D-Sub Arka Muhafazalar BANDING SPLIT BS TOP kablo - kablo EMI
FMCA2573
Plenum Low PIM 7/16 DIN Female to N Female Cable SPP-375-LLPL Coax in 7 Inch Using Times Microwave Parts
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Cstone, N-type, BNC, SMA, SMP, SSMB ve MMCX dâhil RF ve koaksiyel konnektörler, adaptörler ve kablo montajları üreten profesyonel bir fabrikadır; ticaret şirketi değiliz. Konnektörleri 2D çizim veya numuneye göre üretiriz; uygunluk, MOQ, teslim süresi ve üretim ayrıntıları RFQ ile doğrulanır. Cstone Technology orijinal markalarla bağlantılı değildir. Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.