Detail produk
4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Female Low PIM Cable Using 1/4 inch Superflexible Coax
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
4.1/9.5 Mini DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | 1/4" Superflexible |
| Antarmuka | 4.1/9.5 Mini DIN |
| Antarmuka | 4.1/9.5 Mini DIN |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Female |
| Orientasi | Right Angle |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | PE-1/4SFHC |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE3C7824 saat ini mencakup: 4.1/9.5 Mini DIN · 50 Ohm · Right Angle. Katalog saat ini mencantumkan konfigurasi sebagai: Right Angle. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
PE3C5873
Plenum 7/16 DIN Male to QMA Male Right Angle Low PIM Cable Using SPP-250-LLPL Coax , LF Solder
LCCA30221-FT10
L-com's LCCA30221-FT10 is a low loss N male to N female cable assembly using LMR-600-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30221-FT10 L-com Low Loss N Male to N Female Cable Assembly using LMR-600-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE91255
4.1/9.5 Mini DIN Female to N Female Adapter, IP67 UnMated
LCCA30350-FT3
L-com's LCCA30350-FT3 is a low loss 4.3-10 male to N male cable assembly using LMR-600-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30350-FT3 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
550T039M3CCH1-04B
backshell D-Sub BANDING SPLIT BS TOP kabel ke kabel EMI
FMCA2573
Plenum Low PIM 7/16 DIN Female to N Female Cable SPP-375-LLPL Coax in 7 Inch Using Times Microwave Parts
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Cstone Technology adalah mitra pengadaan ekspor berbasis di Tiongkok untuk alternatif yang kompatibel dan tidak berafiliasi dengan merek asli. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.