Ürün detayları
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
Parça numarası (MPN)
Empedans
50 Ohm
Arayüz
7/16 DIN
çizimden özel RF kablo montajı için üretim sourcing
Uyumluluk incelemesi, MOQ rehberi ve cost-down sourcing desteği ile üretime yönelik çizimden özel RF kablo montajı.
RFQ öncesi ne hazırlamalı Net girdiler tahminleri azaltır ve yararlı yanıtı hızlandırır. ⌄
- • İnceleme için önemliyse referans MPN'yi, eşleşen parçayı veya kaynak markayı paylaşın.
- • Proje prototip aşamasını aşıyorsa BOM, adet dağılımı ve yıllık talebi ekleyin.
- • Çizim, veri sayfası veya empedans, frekans, montaj ve kaplama için kritik gereksinimleri ekleyin.
Görsel
Büyütmek için tıklayın.
Specifications
| Arayüz | Coaxial Cable Assemblies |
|---|---|
| Arayüz | 400UF Series |
| Arayüz | 7/16 DIN |
| Arayüz | 7/16 DIN |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Empedans | 50 Ohm |
| Cinsiyet | Male |
| Cinsiyet | Male |
| Yön | Straight |
| Yön | Straight |
| Connector 1 Polarity | Standard |
Show 4 more specs
| Connector 2 Polarity | Standard |
|---|---|
| Category | Coaxial Cable Assemblies |
| Application | RF Voice/Video/Data; Wireless LAN Devices; Antenna Cable; Wireless Infrastructure |
| Product Features | Features 7/16 DIN Male to 7/16 DIN Male connectors; Ideal for indoor or outdoor applications that require maximum flexibility; Each assembly is fully tested ensuring the highest quality; Excellent low loss characteristics; Made with high performance, high quality 400-series ultra flex coax cable |
Açıklama
CA-DMDMH015 için mevcut referans verileri: 7/16 DIN · 50 Ohm · Straight. Katalogdaki yapılandırma şu şekilde listeleniyor: Straight. Empedans 50 Ohm olarak listeleniyor. Kritikse RFQ içinde tekrar doğrulayın. Montaj bilgisi burada yoksa çizimden veya eşleşme gereksiniminden doğrulayın. Bu sayfayı RFQ öncesi kısa liste için kullanın; nihai onay yerine geçmez.
RFQ öncesi kısa liste için bu sayfayı kullanın. MOQ 200+ tedarik yolu ve özel üretim rotası, çizim/şartname/BOM incelemesinden sonra doğrulanır.
Benzer konnektörler
Bu modeller de ilginizi çekebilir:
C091 31H005 100 5 U
Circular DIN konnektör erkek kablo konnektör, Quicklock, Size M16, 5 kontak, gümüş kontak Plating, 5A Arrangement, gümüş kontak Plating, kablo Diameter 4-8.5 mm,
LCCA30210-FT1
L-com's LCCA30210-FT1 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30210-FT1 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30337-FT1
L-com's LCCA30337-FT1 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT1 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30336-FT4
L-com's LCCA30336-FT4 is a low loss N female to 7/16 DIN male cable assembly using LMR-600 coax, 4 FT with Times Microwave components , LF solder and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to 7/16 DIN cable assembly has a female to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30336-FT4 L-com Low Loss N Female to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 4 FT with Times Microwave Components , LF Solder data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
4.3/10P-7/16J
The 4.3/10P-7/16J is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and has a rated voltage of AC 1.8kV, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (1 mΩ(Max.) (4.3/10),0.4 mΩ(Max.) (7/16), and an excellent V.S.W.R 1.2(Max.) at DC~6GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Phosphor Bronze/Silver Plating, while the body is Brass/Ternary Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
CADIN1IW
Modüler Konnektörler / Ethernet Konnektörler DIN rail montaj Adapt ile LBL singl
MPN Arama Tam eşleşme, önek ve kısmi eşleşme desteklenir. ⌄
Sorumluluk reddi
Üretici adları, ticari markalar, semboller ve parça numaraları yalnızca tanımlama ve çapraz referans amacıyla kullanılmaktadır. Cstone Technology, uyumlu alternatifler için Çin merkezli bir ihracat tedarik ortağıdır ve orijinal markalarla bağlantılı değildir. Ticari markalar ilgili sahiplerinin mülkiyetindedir. Nihai uygunluk, RFQ sürecinde çizim/şartname incelemesiyle doğrulanır.