Detaily produktu
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
Číslo dílu (MPN)
Impedance
50 Ohm
Rozhraní
7/16 DIN
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Rozhraní | Coaxial Cable Assemblies |
|---|---|
| Rozhraní | 400UF Series |
| Rozhraní | 7/16 DIN |
| Rozhraní | 7/16 DIN |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Pohlaví | Male |
| Pohlaví | Male |
| Orientace | Straight |
| Orientace | Straight |
| Connector 1 Polarity | Standard |
Show 4 more specs
| Connector 2 Polarity | Standard |
|---|---|
| Category | Coaxial Cable Assemblies |
| Application | RF Voice/Video/Data; Wireless LAN Devices; Antenna Cable; Wireless Infrastructure |
| Product Features | Features 7/16 DIN Male to 7/16 DIN Male connectors; Ideal for indoor or outdoor applications that require maximum flexibility; Each assembly is fully tested ensuring the highest quality; Excellent low loss characteristics; Made with high performance, high quality 400-series ultra flex coax cable |
Popis
Aktuální referenční data pro CA-DMDMH015: 7/16 DIN · 50 Ohm · Straight. Katalog uvádí konfiguraci jako: Straight. Impedance je uvedena jako 50 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Pokud zde montáž chybí, potvrďte ji z výkresu nebo požadavku na protikus. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
C091 31H005 100 5 U
Circular DIN konektory samec kabel konektor, Quicklock, Size M16, 5 kontakty, stříbro kontakt Plating, 5A Arrangement, stříbro kontakt Plating, kabel Diameter 4-8.5 mm,
LCCA30210-FT1
L-com's LCCA30210-FT1 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30210-FT1 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30337-FT1
L-com's LCCA30337-FT1 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT1 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30336-FT4
L-com's LCCA30336-FT4 is a low loss N female to 7/16 DIN male cable assembly using LMR-600 coax, 4 FT with Times Microwave components , LF solder and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to 7/16 DIN cable assembly has a female to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30336-FT4 L-com Low Loss N Female to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 4 FT with Times Microwave Components , LF Solder data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
4.3/10P-7/16J
The 4.3/10P-7/16J is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and has a rated voltage of AC 1.8kV, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (1 mΩ(Max.) (4.3/10),0.4 mΩ(Max.) (7/16), and an excellent V.S.W.R 1.2(Max.) at DC~6GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Phosphor Bronze/Silver Plating, while the body is Brass/Ternary Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
CADIN1IW
Modulární konektory / Ethernet konektory DIN rail montáž Adapt s LBL singl
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Cstone Technology je čínský exportní partner pro kompatibilní alternativy a není propojena s původními značkami. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.