CSTONE
รายการ RFQ

รายละเอียดสินค้า

L-com's LCCA30192-FT2 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT2 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

ทางเลือกที่เข้ากันได้จากจีน — เรายืนยันความเข้ากันจากแบบ/สเปกของคุณ

หมายเลขชิ้นส่วน (MPN)

LCCA30192-FT2

อิมพีแดนซ์

50 Ohm

อินเทอร์เฟซ

N

ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต

ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing

WhatsApp — ตอบเร็ว
ระยะเวลา: 3–6 สัปดาห์ | MOQ: 200+ ชิ้น
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์
  • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
  • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
  • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ

รูปภาพ

คลิกเพื่อขยาย

ภาพสินค้า

LCCA30192-FT2 product photo

LCCA30192-FT2 product photo

Specifications

Specifications for LCCA30192-FT2
อินเทอร์เฟซCoaxial Cable Assemblies
อินเทอร์เฟซLMR-400
อินเทอร์เฟซN
อินเทอร์เฟซN
อิมพีแดนซ์50 Ohm
อิมพีแดนซ์50 Ohm
อิมพีแดนซ์50 Ohm
เพศของคอนเนคเตอร์Male
เพศของคอนเนคเตอร์Male
ทิศทางRight Angle
ทิศทางStraight
Connector 1 Body MaterialBrass
Show 5 more specs
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
ประเภทสายเคเบิลLMR-400
CategoryCoaxial Cable Assemblies

คำอธิบาย

ข้อมูลอ้างอิงปัจจุบันสำหรับ LCCA30192-FT2: N · 50 Ohm · Right Angle แคตตาล็อกระบุโครงแบบไว้เป็น: Right Angle อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ วัสดุระบุเป็น Brass ข้อมูลนี้ช่วยตรวจสอบได้ แต่ไม่แทนการยืนยันโครงสร้างโครงการทั้งหมด ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย

ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM

คอนเนคเตอร์ที่คล้ายกัน

คุณอาจสนใจรุ่นเหล่านี้ด้วย:

LMR-200-UF

LMR-200-UF coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-200-UF coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-200-UF is constructed with a 0.195 inch diameter and Black TPE jacket. LMR-200-UF flexible 50 Ohm coax cable with TPE jacket is rated for a 5.8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-200-UF coax is constructed with PE (F) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-200-UF coax cable specs for this wire properties can be found on its RF coax cable LMR-200-UF datasheet. LMR-200-UF cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-200-UF coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.

ดูรายละเอียด →

PE3C6230

Plenum 4.3-10 Male to 7/16 DIN Female Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts

ดูรายละเอียด →

T 3300 005

Circular DIN คอนเนคเตอร์ 4 พิน ตัวผู้; มุมฉาก สายเคเบิล ติดตั้ง

ดูรายละเอียด →

80392752

The phase invariant MINIBEND CTR line of cable assemblies maintains the bend-to-the-end solderless connector termination technology and introduces industry-leading phase versus temperature performance with an absolute phase change of <300 ppm over a temperature range of -50°C to +125°C.

ดูรายละเอียด →

LCCA30265-FT5

L-com's LCCA30265-FT5 is a low loss 4.3-10 male to N male cable assembly using LMR-240 coax, 5 FT with Times Microwave components and ships same-day. The LMR-240 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30265-FT5 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-240 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

ดูรายละเอียด →

LCCA30198-FT6

L-com's LCCA30198-FT6 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30198-FT6 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

ดูรายละเอียด →
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน

รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน

ข้อจำกัดความรับผิดชอบ

Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ