Szczegóły produktu
L-com's LCCA30192-FT2 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT2 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Numer części (MPN)
Impedancja
50 Ohm
Interfejs
N
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Coaxial Cable Assemblies |
|---|---|
| Interfejs | LMR-400 |
| Interfejs | N |
| Interfejs | N |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Płeć | Male |
| Płeć | Male |
| Orientacja | Right Angle |
| Orientacja | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Typ kabla | LMR-400 |
| Category | Coaxial Cable Assemblies |
Opis
Aktualne dane referencyjne dla LCCA30192-FT2: N · 50 Ohm · Right Angle. Katalog podaje konfigurację jako: Right Angle. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LMR-200-UF
LMR-200-UF coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com Microwave LMR-200-UF coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-200-UF is constructed with a 0.195 inch diameter and Black TPE jacket. LMR-200-UF flexible 50 Ohm coax cable with TPE jacket is rated for a 5.8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com Microwave LMR-200-UF coax is constructed with PE (F) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-200-UF coax cable specs for this wire properties can be found on its RF coax cable LMR-200-UF datasheet. LMR-200-UF cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-200-UF coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
PE3C6230
Plenum 4.3-10 Male to 7/16 DIN Female Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
T 3300 005
Circular DIN złącza 4 pin męski; Kątowe kabel montaż
80392752
The phase invariant MINIBEND CTR line of cable assemblies maintains the bend-to-the-end solderless connector termination technology and introduces industry-leading phase versus temperature performance with an absolute phase change of <300 ppm over a temperature range of -50°C to +125°C.
LCCA30265-FT5
L-com's LCCA30265-FT5 is a low loss 4.3-10 male to N male cable assembly using LMR-240 coax, 5 FT with Times Microwave components and ships same-day. The LMR-240 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30265-FT5 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-240 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30198-FT6
L-com's LCCA30198-FT6 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30198-FT6 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.