รายละเอียดสินค้า
This Reverse Polarity SMA Jack (RP-SMA) coupler provides the ability to interconnect two devices with RP-SMA Plug interfaces. The bulkhead design provides the ability to pass a coaxial connection through a panel or bulkhead. A common use for this device is to create a connection point on either side of a wall or other obstruction.
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
50 Ohm
ความถี่
DC
อินเทอร์เฟซ
SMA
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| อินเทอร์เฟซ | Coaxial Adapters |
|---|---|
| อินเทอร์เฟซ | SMA |
| อินเทอร์เฟซ | SMA |
| อิมพีแดนซ์ | 50 Ohm |
| อิมพีแดนซ์ | 50 Ohm |
| ความถี่ (สูงสุด) | DC |
| ความถี่ (สูงสุด) | 11 GHz |
| เพศของคอนเนคเตอร์ | Jack |
| เพศของคอนเนคเตอร์ | Jack |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 9 more specs
| Connector Body Plating 1 | Nickel |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Reverse Polarity |
| Connector Polarity 2 | Reverse Polarity |
| การติดตั้ง | None |
| การติดตั้ง | Bulkhead |
| Category | Coaxial Adapters |
| Application | Coaxial interface conversion; Coax retrofit applications; Coaxial Extension; OEM coax applications |
| Product Features | Handy device to have on hand to solve your interconnection problems; Nickel plated body for enhanced corrosion resistance; Gold plated center contact for reduced signal loss |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ AXA-RSJRSJB: SMA · 50 Ohm · DC อิมพีแดนซ์ระบุเป็น 50 Ohm หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ ความถี่ระบุเป็น DC ขีดจำกัดใช้งานจริงยังขึ้นกับชุดประกอบ ชิ้นส่วนคู่ต่อ และบริบทการใช้งาน การติดตั้งระบุเป็น Bulkhead หากข้อจำกัดด้านแผง การติดตั้งทะลุผนัง หรือหน้าแปลนสำคัญ โปรดส่งมิติพร้อม RFQ วัสดุระบุเป็น Brass ข้อมูลนี้ช่วยตรวจสอบได้ แต่ไม่แทนการยืนยันโครงสร้างโครงการทั้งหมด ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
CONREVSMA001
RF คอนเนคเตอร์ โคแอกเชียล คอนเนคเตอร์ RP-SMA ตัวเมีย ติดตั้งบน PCB
MC-3J-C
The MC-3J-C is an MC Straight Jack connector. This connector is suitable for various high-frequency applications. It features a impedance Mismatch, and has a rated voltage of AC 125V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (5 mΩ(Max.). The contact is made of Phosphor Bronze/Gold Plating, while the body is Zinc Die-Cast/Nickel Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
73251-0240
คอนเนคเตอร์ RF / คอนเนคเตอร์โคแอกเชียล SMA แจ็ค RECPT BKHD บัดกรี POT
PE4870
RP SMA Female Right Angle Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing
LCCA30206-FT6
L-com's LCCA30206-FT6 is a low loss SMA male to SMA male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to SMA cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30206-FT6 L-com Low Loss SMA Male to SMA Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
A85S30-223-
SMA แจ็ค bulkhead IP67 mated ถึง SMB ปลั๊ก using RG223
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
ชื่อผู้ผลิต เครื่องหมายการค้า สัญลักษณ์ และหมายเลขชิ้นส่วนใช้เพื่อการระบุตัวตนและอ้างอิงข้ามเท่านั้น Cstone Technology เป็นพันธมิตรจัดหาสินค้าส่งออกจากประเทศจีนสำหรับทางเลือกที่เข้ากันได้ และไม่มีส่วนเกี่ยวข้องกับแบรนด์ดั้งเดิม เครื่องหมายการค้ายังคงเป็นทรัพย์สินของเจ้าของที่เกี่ยวข้อง ความเหมาะสมขั้นสุดท้ายได้รับการยืนยันโดยการตรวจสอบแบบ/สเปกระหว่าง RFQ