تفاصيل المنتج
This Reverse Polarity SMA Jack (RP-SMA) coupler provides the ability to interconnect two devices with RP-SMA Plug interfaces. The bulkhead design provides the ability to pass a coaxial connection through a panel or bulkhead. A common use for this device is to create a connection point on either side of a wall or other obstruction.
رقم الجزء (MPN)
المعاوقة
50 Ohm
التردد
DC
الواجهة
SMA
كابل RF مخصص من الرسم لتوريد الإنتاج
كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة. ⌄
- • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
- • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
- • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.
الصورة
انقر للتكبير.
Specifications
| الواجهة | Coaxial Adapters |
|---|---|
| الواجهة | SMA |
| الواجهة | SMA |
| المعاوقة | 50 Ohm |
| المعاوقة | 50 Ohm |
| التردد (الحد الأقصى) | DC |
| التردد (الحد الأقصى) | 11 GHz |
| نوع الموصل | Jack |
| نوع الموصل | Jack |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 9 more specs
| Connector Body Plating 1 | Nickel |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Reverse Polarity |
| Connector Polarity 2 | Reverse Polarity |
| طريقة التركيب | None |
| طريقة التركيب | Bulkhead |
| Category | Coaxial Adapters |
| Application | Coaxial interface conversion; Coax retrofit applications; Coaxial Extension; OEM coax applications |
| Product Features | Handy device to have on hand to solve your interconnection problems; Nickel plated body for enhanced corrosion resistance; Gold plated center contact for reduced signal loss |
الوصف
البيانات المرجعية الحالية لـ AXA-RSJRSJB: SMA · 50 Ohm · DC. المعاوقة مدرجة كـ 50 Ohm. إذا كان هذا العامل حرجًا، فأكده مرة أخرى في RFQ. التردد مدرج كـ DC. الحد التشغيلي الفعلي يعتمد على التجميع وقطعة التزاوج وسياق الاستخدام. طريقة التركيب مدرجة كـ Bulkhead. إذا كانت قيود اللوحة أو التركيب النافذ أو الفلنجة مهمة، فأرسل الأبعاد مع RFQ. المادة مدرجة كـ Brass. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.
استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.
موصلات مشابهة
قد تهمك أيضًا هذه النماذج:
CONREVSMA001
RF موصلات محوري موصلات RP-SMA أنثى تركيب على PCB
MC-3J-C
The MC-3J-C is an MC Straight Jack connector. This connector is suitable for various high-frequency applications. It features a impedance Mismatch, and has a rated voltage of AC 125V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (5 mΩ(Max.). The contact is made of Phosphor Bronze/Gold Plating, while the body is Zinc Die-Cast/Nickel Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
73251-0240
موصلات RF / موصلات محورية SMA مقبس RECPT BKHD لحام POT
PE4870
RP SMA Female Right Angle Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing
LCCA30206-FT6
L-com's LCCA30206-FT6 is a low loss SMA male to SMA male cable assembly using LMR-400-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to SMA cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30206-FT6 L-com Low Loss SMA Male to SMA Male Cable Assembly using LMR-400-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
A85S30-223-
SMA مقبس bulkhead IP67 mated إلى SMB قابس using RG223
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية. ⌄
إخلاء المسؤولية
تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. Cstone Technology هي شريك توريد تصدير مقره الصين لبدائل متوافقة وليست تابعة للعلامات التجارية الأصلية. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.