รายละเอียดสินค้า
BNC มุมฉาก PCB แจ็ค เสียบรู Bulkhead Rear ติดตั้ง 75 Ω
หมายเลขชิ้นส่วน (MPN)
อิมพีแดนซ์
75
ความถี่
0.5
ชุดสาย RF custom จากแบบ สำหรับ sourcing เพื่อการผลิต
ชุดสาย RF custom จากแบบ สำหรับการผลิต พร้อมตรวจ compatibility แนะนำ MOQ และสนับสนุน cost-down sourcing
ต้องเตรียมอะไรก่อน RFQ ข้อมูลที่ชัดเจนช่วยลดการคาดเดาและเร่งคำตอบที่เป็นประโยชน์ ⌄
- • แจ้ง MPN อ้างอิง ชิ้นส่วนที่เข้าคู่กัน หรือแบรนด์ต้นทาง หากเกี่ยวข้องกับการตรวจสอบ
- • เพิ่ม BOM การแบ่งจำนวน และความต้องการรายปี หากโครงการเกินขั้นต้นแบบ
- • แนบแบบ แผ่นข้อมูล หรือข้อกำหนดสำคัญด้านอิมพีแดนซ์ ความถี่ การติดตั้ง และการชุบ
รูปภาพ
คลิกเพื่อขยาย
Specifications
| ผิวบอดี้ | นิกเกิล |
|---|---|
| วัสดุบอดี้ | สังกะสี Diecast |
| สายเคเบิล ประเภท (Terminates ถึง) | ไม่เกี่ยวข้อง |
| ผิวคอนแทค | ทอง |
| วัสดุคอนแทค | ทองเหลือง |
| การเข้าปลายคอนแทค | บัดกรี |
| กลไกการล็อก | เบโยเน็ต |
| หมายเลขควบคุมการส่งออก | EAR99 |
| ความถี่ (สูงสุด) | 0.5 |
| เพศ | แจ็ค |
| ระดับ IP | ไม่ระบุ |
| อิมพีแดนซ์ | 75 |
Show 13 more specs
| วัสดุอินซูเลเตอร์ | Polypropylene |
|---|---|
| แยกวงจร | ไม่ |
| Low PIM | ไม่ |
| ผ่านมาตรฐาน MIL | ไม่ผ่านมาตรฐาน MIL |
| ไม่เป็นแม่เหล็ก | ไม่ |
| ทิศทาง | มุมฉาก |
| คุณสมบัติการติดตั้งบนแผง | Bulkhead - Rear ติดตั้ง |
| พอร์ต | 1 (Single Port) |
| ความยาวโพสต์ | 0.120 Inches (3.05 mm) |
| หมวดขนาด | Miniature |
| อุณหภูมิ (สูงสุด °C) | 85 |
| อุณหภูมิ (ต่ำสุด °C) | -55 |
| รูปแบบการเข้าปลาย | PCB - เสียบรู |
คำอธิบาย
ข้อมูลอ้างอิงปัจจุบันสำหรับ 031-6071: 75 · 0.5 อิมพีแดนซ์ระบุเป็น 75 หากค่านี้สำคัญ โปรดยืนยันอีกครั้งใน RFQ ความถี่ระบุเป็น 0.5 ขีดจำกัดใช้งานจริงยังขึ้นกับชุดประกอบ ชิ้นส่วนคู่ต่อ และบริบทการใช้งาน หากไม่มีข้อมูลการติดตั้งที่นี่ ให้ยืนยันจากแบบหรือข้อกำหนดการจับคู่ แคตตาล็อกยังระบุค่าการซีลหรือการป้องกัน ไม่ระบุ โปรดเทียบกับสภาพแวดล้อมใช้งานจริงใน RFQ ใช้หน้านี้เพื่อคัดเลือกก่อน RFQ ไม่ใช่การอนุมัติขั้นสุดท้าย
ใช้หน้านี้เพื่อคัดกรองก่อน RFQ เส้นทางจัดหาและเส้นทางผลิตตามสั่ง MOQ 200+ จะยืนยันหลังตรวจแบบ/สเปก/BOM
คอนเนคเตอร์ที่คล้ายกัน
คุณอาจสนใจรุ่นเหล่านี้ด้วย:
CA-FMEJBMA004
High quality fully tested FME to BNC cable assemblies featuring high performance low loss 195-series coax cable. Available cable assemblies include FME Plug to BNC Male (Plug) and FME Jack to BNC Male (Plug). Many cellular communication devices utilize FME connectors on coaxial antenna lines. These high quality connectors utilize machined brass with nickel plated surfaces and gold plated pins. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.
LCCA30324-FT1.5
L-com's LCCA30324-FT1.5 is a low loss BNC male to TNC male right angle cable assembly using LMR-400-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30324-FT1.5 L-com Low Loss BNC Male to TNC Male Right Angle Cable Assembly using LMR-400-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCAD9790
L-com’s LCAD9790 50 ohm BNC male to Double Banana Binding Post jack adapter is part of our full line of RF components available for same-day shipping. Our BNC to Double Banana Binding Post adapter has a male to jack gender configuration. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. L-com also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
PT81.5BN
RF ชุดสายเคเบิล CASSY, 58A, BNCM, NM
361V704ET
คอนเนคเตอร์ RF / คอนเนคเตอร์โคแอกเชียล BNC แจ็ค 75 Ω
73119-5003
คอนเนคเตอร์ RF / คอนเนคเตอร์โคแอกเชียล BNC ตรง BULKHEA NC ตรง BULKHEAD
ค้นหา MPN รองรับการค้นหาแบบตรงตัว คำนำหน้า และบางส่วน ⌄
ข้อจำกัดความรับผิดชอบ
Cstone เป็นโรงงานมืออาชีพ ไม่ใช่บริษัทการค้า ผลิตคอนเนคเตอร์ RF และโคแอกเชียล อะแดปเตอร์ และชุดสาย รวมถึง N-type, BNC, SMA, SMP, SSMB และ MMCX เราผลิตคอนเนคเตอร์ตามแบบ 2D หรือตัวอย่าง และยืนยันความเหมาะสม MOQ ระยะเวลาจัดส่ง และรายละเอียดการผลิตผ่าน RFQ Cstone Technology ไม่มีความเกี่ยวข้องกับแบรนด์ต้นฉบับ