제품 상세
BNC 직각 PCB 잭 스루홀 Bulkhead Rear 장착 75 Ω
품번 (MPN)
주파수
0.5
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 바디 마감 | 니켈 |
|---|---|
| 바디 재질 | Zinc Diecast |
| 케이블 유형 (Terminates 까지) | 해당 없음 |
| 접점 마감 | 금 |
| 접점 재질 | 황동 |
| 접점 종단 | 솔더 |
| 결합 메커니즘 | 바요넷 |
| 수출통제분류번호 | EAR99 |
| 주파수(최대) | 0.5 |
| 성별 | 잭 |
| IP 등급 | 정격 없음 |
| 임피던스 (Ω) | 75 |
Show 13 more specs
| 절연체 재질 | Polypropylene |
|---|---|
| 절연됨 | 아니오 |
| Low PIM | 아니오 |
| MIL 인증 | MIL 미인증 |
| 비자성 | 아니오 |
| 방향 | 직각 |
| 패널 장착 Feature | Bulkhead - Rear 장착 |
| 포트 | 1 (Single Port) |
| 포스트 길이 | 0.120 Inches (3.05 mm) |
| 사이즈 카테고리 | Miniature |
| 온도 (Max °C) | 85 |
| 온도 (Min °C) | -55 |
| 종단 방식 | PCB - 스루홀 |
설명
031-6071의 현재 참조 데이터: 0.5. 주파수는 0.5로 표시되어 있습니다. 실제 작동 한계는 조립 상태, 결합 부품, 적용 환경에 따라 달라집니다. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 카탈로그에는 밀폐 또는 보호 값 정격 없음도 표시되어 있습니다. 실제 사용 환경 요구와 RFQ에서 대조하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
CA-FMEJBMA004
High quality fully tested FME to BNC cable assemblies featuring high performance low loss 195-series coax cable. Available cable assemblies include FME Plug to BNC Male (Plug) and FME Jack to BNC Male (Plug). Many cellular communication devices utilize FME connectors on coaxial antenna lines. These high quality connectors utilize machined brass with nickel plated surfaces and gold plated pins. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.
LCCA30324-FT1.5
L-com's LCCA30324-FT1.5 is a low loss BNC male to TNC male right angle cable assembly using LMR-400-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30324-FT1.5 L-com Low Loss BNC Male to TNC Male Right Angle Cable Assembly using LMR-400-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCAD9790
L-com’s LCAD9790 50 ohm BNC male to Double Banana Binding Post jack adapter is part of our full line of RF components available for same-day shipping. Our BNC to Double Banana Binding Post adapter has a male to jack gender configuration. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. L-com also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
PT81.5BN
RF 케이블 어셈블리 CASSY, 58A, BNCM, NM
361V704ET
RF 커넥터 / 동축 커넥터 BNC 잭 75 Ω
73119-5003
RF 커넥터 / 동축 커넥터 BNC 직선 BULKHEA NC 직선 BULKHEAD
면책 조항
Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.