Детали изделия
SMA панельный монтаж гнездо 4-Hole Flange Round Post 50 Ω
Номер детали (MPN)
Импеданс
EAR99
Частота
12.4
кабельная РЧ-сборка по чертежу для production sourcing
кабельная РЧ-сборка по чертежу для production-oriented sourcing с проверкой совместимости, MOQ и cost-down.
Что подготовить до RFQ Чёткие вводные ускоряют проверку. ⌄
- • Укажите справочный MPN и исходный бренд, если это важно.
- • Для серийного проекта добавьте BOM и разбивку количества.
- • Приложите чертёж или ключевые требования к совместимости.
Изображение
Нажмите изображение, чтобы увеличить.
Характеристики
| Импеданс | 50 |
|---|---|
| Частота (макс.) | 12.4 |
| Пол (Gender) | Гнездо |
| Ориентация | Прямой |
| Тип монтажа | 4-Hole Flange |
| Покрытие корпуса | Золото |
| Материал корпуса | Латунь |
| Тип кабеля | Неприменимо |
| Финиш контакта | Золото |
| Материал контактов | Бериллиевая медь |
| Терминация контакта | Пайка |
| Механизм фиксации | Threaded |
Показать ещё 16 характеристик
| Номер классификации экспортного контроля | EAR99 |
|---|---|
| Extended Dielectric Length | 0.591 Inches (15.01 mm) |
| Тип монтажа | 0.500 Inches (12.70 mm) Square |
| IP защита | Not Rated |
| Материал изолятора | PTFE |
| Изолированный | Нет |
| Низкий PIM | Нет |
| Сертификация MIL | Not Mil Qualified |
| Немагнитный | Нет |
| Порты | 1 (Single Port) |
| Post Length | 0.705 Inches (17.91 mm) |
| размер Category | Subminiature |
| Темп. (макс °C) | 165 |
| Темп. (мин °C) | -65 |
| Тип терминации | Round Post |
| Механизм фиксации | стандартный |
Описание
Текущие справочные данные для 132146: EAR99 · 12.4 · 0.500 Inches (12.70 mm) Square. В каталоге конфигурация указана как: Прямой. Импеданс указан как EAR99. Если параметр критичен, подтвердите его в RFQ. Частота указана как 12.4. Реальный рабочий предел зависит от сборки, ответной части и условий применения. Для высокочастотных проектов приложите чертёж, схему кабеля и критичные требования уже в первом RFQ. Монтаж указан как 0.500 Inches (12.70 mm) Square. Если важны панель, проходной монтаж или фланец, отправьте размеры вместе с RFQ. В каталоге также указан параметр герметизации/защиты: Not Rated. Сверьте его с реальными условиями эксплуатации в RFQ. Используйте эту страницу для отбора перед RFQ, а не как финальное подтверждение.
Используйте эту страницу для отбора перед RFQ. Цепочка поставки и маршрут заказного производства MOQ 200+ подтверждаются после проверки чертежа/спецификации/BOM.
Похожие разъемы
Похожие модели:
FMAT7433-40
0 to 40 dB Variable Attenuator SMA Female to SMA Female from 7 GHz to 10 GHz Rated to 5 Watts
CA-085FSMSM036
An attractive alternative to semi-rigid cable, these high quality fully tested SMA-Male to SMA-Male cable assemblies feature .085 Formable coax. Ideal for laying out and designing pre-bent semi-rigid assemblies. Not exactly what you are looking for? We can custom build your formable cable assemblies using state of the art stripping equipment and with a wide array of available connectors. Contact us today with your custom cable requirement. Also be sure to inquire about lead-free formable cable assemblies.
9046-9513-001
SMA / прямой вилка male PASSIVATED
LCCA30603-FT2
L-com BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30603-FT2 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC bulkhead connection on one end and SMA connection on the other. This BNC to SMA cable from L-com has a female to female gender combination. Our BNC female to SMA female coaxial assembly part number LCCA30603-FT2 can also be known as BNC jack to SMA jack cable assembly when using alternate gender names. BNC jack to SMA jack cable assembly LCCA30603-FT2 is manufactured with a formable coax. These formable BNC to SMA cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to SMA F/F cables is 1 GHz. Technical performance specifications on these 1 GHz BNC femalebulkhead to SMA female cables are located on the LCCA30603-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to BNC female bulkhead cable assembly because it can be used in the opposite direction.BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT.
R411810000
Attenuators - Interconnects ATT SMA.75 10DB 15 GHz 2W
LCCA30027-FT5
L-com low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30027-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with N connection on one end and right angle SMA connection on the other. This low loss N to right angle SMA cable from L-com has a male to male gender combination. Our N male to SMA male coaxial assembly part number LCCA30027-FT5 can also be known as low loss N plug to right angle SMA plug cable assembly when using alternate gender names. N plug to SMA plug cable assembly LCCA30027-FT5 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz N male to SMA right angle male cables are located on the LCCA30027-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to N male cable assembly because it can be used in the opposite direction.Low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT.
Поиск MPN Поддержка: точное совпадение, префикс и частичное вхождение. ⌄
Отказ от ответственности
Названия производителей, товарные знаки, символы и номера деталей используются только для идентификации и перекрёстной ссылки. Cstone Technology — китайский экспортный партнёр по совместимым альтернативам и не связана с оригинальными брендами. Товарные знаки принадлежат их владельцам. Окончательная пригодность подтверждается при анализе чертежа/спецификации в ходе RFQ.