جزئیات محصول
SMA Panel Mount Jack 4-Hole Flange Round Post 50 Ohm
شماره قطعه (MPN)
Impedance
50
Frequency
12.4
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Not Applicable |
|---|---|
| امپدانس | 50 |
| فرکانس (حداکثر) | 12.4 |
| جنسیت | Jack |
| جهتگیری | Straight |
| ترمینیشن | Solder |
| ترمینیشن | Round Post |
| نصب | 4-Hole Flange |
| Body Material | Brass |
| ترمینیشن | Beryllium Copper |
| Body Finish | Gold |
| ترمینیشن | Gold |
نمایش 16 مشخصه بیشتر
| مکانیزم کوپلینگ | Threaded |
|---|---|
| Export Control Classification Number | EAR99 |
| Extended Dielectric Length | 0.591 Inches (15.01 mm) |
| نصب | 0.500 Inches (12.70 mm) Square |
| درجه IP | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Post Length | 0.705 Inches (17.91 mm) |
| Size Category | Subminiature |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| مکانیزم کوپلینگ | Standard |
توضیح
داده مرجع فعلی برای 132146: 50 · 12.4 · 0.500 Inches (12.70 mm) Square. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Straight · Solder. امپدانس بهصورت 50 ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. فرکانس بهصورت 12.4 ثبت شده است. حد واقعی هنوز به مجموعه، جفت اتصال و کاربرد وابسته است. برای پروژههای فرکانس بالاتر، نقشه، مسیر کابل و نیازهای بحرانی را در اولین RFQ بفرستید. نصب بهصورت 0.500 Inches (12.70 mm) Square ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس بهصورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. کاتالوگ مقدار آببندی یا حفاظت را نیز Not Rated نشان میدهد. آن را با شرایط واقعی محیط در RFQ مقایسه کنید. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
FMAT7433-40
0 to 40 dB Variable Attenuator SMA Female to SMA Female from 7 GHz to 10 GHz Rated to 5 Watts
CA-085FSMSM036
An attractive alternative to semi-rigid cable, these high quality fully tested SMA-Male to SMA-Male cable assemblies feature .085 Formable coax. Ideal for laying out and designing pre-bent semi-rigid assemblies. Not exactly what you are looking for? We can custom build your formable cable assemblies using state of the art stripping equipment and with a wide array of available connectors. Contact us today with your custom cable requirement. Also be sure to inquire about lead-free formable cable assemblies.
9046-9513-001
SMA / STRAIGHT PLUG MALE PASSIVATED
LCCA30603-FT2
L-com BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30603-FT2 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC bulkhead connection on one end and SMA connection on the other. This BNC to SMA cable from L-com has a female to female gender combination. Our BNC female to SMA female coaxial assembly part number LCCA30603-FT2 can also be known as BNC jack to SMA jack cable assembly when using alternate gender names. BNC jack to SMA jack cable assembly LCCA30603-FT2 is manufactured with a formable coax. These formable BNC to SMA cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to SMA F/F cables is 1 GHz. Technical performance specifications on these 1 GHz BNC femalebulkhead to SMA female cables are located on the LCCA30603-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to BNC female bulkhead cable assembly because it can be used in the opposite direction.BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female bulkhead to SMA female cable assembly using LC085TBJ coax, 2 FT.
R411810000
Attenuators - Interconnects ATT SMA.75 10DB 15GHZ 2W
LCCA30027-FT5
L-com low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30027-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with N connection on one end and right angle SMA connection on the other. This low loss N to right angle SMA cable from L-com has a male to male gender combination. Our N male to SMA male coaxial assembly part number LCCA30027-FT5 can also be known as low loss N plug to right angle SMA plug cable assembly when using alternate gender names. N plug to SMA plug cable assembly LCCA30027-FT5 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz N male to SMA right angle male cables are located on the LCCA30027-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to N male cable assembly because it can be used in the opposite direction.Low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss N male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 5 FT.
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعههای کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشههای 2D یا نمونه تولید میکنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید میشود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.