Detalhes do produto
BNC Ângulo reto PCB jack Furo passante Bulkhead Rear montagem 50 Ω
Número da peça (MPN)
Impedância
50
Frequência
1
cabo RF customizado a partir de desenho para sourcing de produção
cabo RF customizado a partir de desenho orientado à produção com revisão de compatibilidade, orientação de MOQ e suporte de sourcing cost-down.
O que preparar antes do RFQ Dados claros reduzem suposições e agilizam uma resposta útil. ⌄
- • Compartilhe o MPN de referência, a peça de acoplamento ou a marca de origem se for relevante para a revisão.
- • Adicione o BOM, a divisão de quantidade e a demanda anual se o projeto for além do volume de protótipo.
- • Anexe o desenho, a ficha técnica ou os requisitos críticos de impedância, frequência, montagem e revestimento.
Imagem
Clique para ampliar.
Specifications
| Acabamento do corpo | Níquel |
|---|---|
| Material do corpo | zinco Diecast |
| Classificação IP | Não aplicável |
| Acabamento de contato | Ouro |
| Material de contato | Bronze fosforoso |
| Terminação de contato | Solda |
| Mecanismo de acoplamento | Baioneta |
| Número de classificação de controle de exportação | EAR99 |
| Frequência (máx.) | 1 |
| Gênero | Jack |
| Classificação IP | Não classificado |
| Impedância | 50 |
Show 12 more specs
| Material do isolador | Polypropylene |
|---|---|
| Isolado | Não |
| Baixo PIM | Não |
| Qualificado MIL | Não qualificado MIL |
| Não magnético | Não |
| Orientação | Ângulo reto |
| Recurso de montagem em painel | Bulkhead - Rear montagem |
| Portas | 2 (Dual Port) |
| Categoria de tamanho | Miniature |
| Temperatura (máx °C) | 85 |
| Temperatura (mín °C) | -40 |
| Estilo de terminação | PCB - Furo passante |
Descrição
Dados de referência atuais para 031-6578: 50 · 1. A impedância está listada como 50. Se esse parâmetro for crítico, confirme-o novamente no RFQ. A frequência está listada como 1. O limite real de operação ainda depende do conjunto, do par de acoplamento e do contexto de aplicação. Se a montagem estiver ausente aqui, confirme-a pelo desenho ou pelo requisito de acoplamento. O material está listado como zinco Diecast. Isso ajuda na revisão, mas não substitui a confirmação completa da estrutura do projeto. O catálogo também lista um valor de vedação ou proteção de Não classificado. Compare isso com o requisito real de ambiente no RFQ. Use esta página para pré-seleção antes do RFQ, não como aprovação final.
Use esta página para filtrar antes do RFQ. A rota de fornecimento e a produção sob medida MOQ 200+ são confirmadas após revisão do desenho/especificação/BOM.
Conectores similares
Você também pode se interessar por estes modelos:
PE9269
BNC Male to BNC Female Adapter
LCCA30701-FT1.5
L-com N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30701-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and BNC connection on the other. This right angle N to BNC cable from L-com has a male to female gender combination. Our N male to BNC female coaxial assembly part number LCCA30701-FT1.5 can also be known as right angle N plug to BNC jack cable assembly when using alternate gender names. N plug to BNC jack cable assembly LCCA30701-FT1.5 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC M/F cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to BNC female cables are located on the LCCA30701-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC female to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT.
CO-058BNCX200-006
RF Conjunto de cabo CA BNC M / BNC M RG58C / U 6'
LCCA30303/WP-FT1
The L-com LCCA30303/WP-FT1 is a weatherproof low loss cable assembly that comes with BNC male connection on one end and type N male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The BNC male to type N male cable assembly LCCA30303/WP-FT1 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30303/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to type N male cable assembly as per your requirements.
LCCA30268-FT5
L-com low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30268-FT5 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with BNC connection on one end and N bulkhead connection on the other. This low loss BNC to N cable from L-com has a male to female gender combination. Our BNC male to N female coaxial assembly part number LCCA30268-FT5 can also be known as low loss BNC plug to N jack cable assembly when using alternate gender names. BNC plug to N jack cable assembly LCCA30268-FT5 is manufactured with a flexible coax. These flexible BNC to N cable assemblies use LMR-240 coax and are double shielded. L-com double shielded low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to N M/F cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz BNC male to N female bulkhead cables are located on the LCCA30268-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to BNC male cable assembly because it can be used in the opposite direction.Low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components.
095-850-193M500
RF Conjunto de cabo BNC reto Jck - HD-BNC reto Plg 4855R 5m
Busca por MPN Suporta correspondência exata, por prefixo e parcial. ⌄
Isenção de responsabilidade
A Cstone é uma fábrica profissional, não uma empresa comercial, especializada em conectores RF e coaxiais, adaptadores e conjuntos de cabos, incluindo N-type, BNC, SMA, SMP, SSMB e MMCX. Fabricamos conectores conforme desenhos 2D ou amostras; compatibilidade, MOQ, prazo e detalhes de produção são confirmados no RFQ. A Cstone Technology não é afiliada às marcas originais. Nomes de fabricantes, marcas registradas, símbolos e números de peça são usados apenas para identificação e referência cruzada. As marcas registradas permanecem propriedade de seus respectivos donos. A adequação final é confirmada por revisão de desenho/especificação durante o RFQ.