Detalles del producto
BNC en ángulo recto PCB jack montaje pasante Bulkhead Rear montaje 50 Ω
Número de parte (MPN)
Impedancia
50
Frecuencia
1
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Acabado del cuerpo | níquel |
|---|---|
| Material del cuerpo | zamak |
| Grado IP | Not Applicable |
| Terminación | oro |
| Terminación | bronce fosforoso |
| Terminación | soldadura |
| Mecanismo de acoplamiento | Bayonet |
| Número ECCN | EAR99 |
| Frecuencia (máx.) | 1 |
| Género | jack |
| Grado IP | Not Rated |
| Impedancia | 50 |
Show 12 more specs
| Material del aislante | Polypropylene |
|---|---|
| Aislado | no |
| Bajo PIM | no |
| Calificación MIL | Not Mil Qualified |
| No magnético | no |
| Orientación | en ángulo recto |
| Montaje | Bulkhead - Rear montaje |
| Puertos | 2 (Dual Port) |
| Categoría de tamaño | Miniature |
| Temp. máxima (°C) | 85 |
| Temp. mínima (°C) | -40 |
| Estilo de terminación | PCB - montaje pasante |
Descripción
Los datos de referencia para 031-6578 incluyen actualmente: 50 · 1 · Bulkhead - Rear montaje. La impedancia se indica como 50. Si es un parámetro crítico, confírmelo en el RFQ. La frecuencia se indica como 1. El límite real depende del ensamblaje, par de acoplamiento y contexto. El montaje se indica como Bulkhead - Rear montaje. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como zamak. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. El catálogo también muestra un valor de sellado/protección: Not Rated. Verifíquelo con el requisito real. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
PE9269
BNC Male to BNC Female Adapter
LCCA30701-FT1.5
L-com N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30701-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and BNC connection on the other. This right angle N to BNC cable from L-com has a male to female gender combination. Our N male to BNC female coaxial assembly part number LCCA30701-FT1.5 can also be known as right angle N plug to BNC jack cable assembly when using alternate gender names. N plug to BNC jack cable assembly LCCA30701-FT1.5 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC M/F cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to BNC female cables are located on the LCCA30701-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC female to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to BNC female cable assembly using RG58 coax, 1.5 FT.
CO-058BNCX200-006
RF ensamblaje de cable CA BNC M/BNC M RG58C/U 6'
LCCA30303/WP-FT1
The L-com LCCA30303/WP-FT1 is a weatherproof low loss cable assembly that comes with BNC male connection on one end and type N male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The BNC male to type N male cable assembly LCCA30303/WP-FT1 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30303/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to type N male cable assembly as per your requirements.
LCCA30268-FT5
L-com low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30268-FT5 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with BNC connection on one end and N bulkhead connection on the other. This low loss BNC to N cable from L-com has a male to female gender combination. Our BNC male to N female coaxial assembly part number LCCA30268-FT5 can also be known as low loss BNC plug to N jack cable assembly when using alternate gender names. BNC plug to N jack cable assembly LCCA30268-FT5 is manufactured with a flexible coax. These flexible BNC to N cable assemblies use LMR-240 coax and are double shielded. L-com double shielded low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to N M/F cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz BNC male to N female bulkhead cables are located on the LCCA30268-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to BNC male cable assembly because it can be used in the opposite direction.Low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss BNC male to N female bulkhead cable assembly using LMR-240 coax, 5 FT with Times Microwave components.
095-850-193M500
RF ensamblaje de cable BNC Str Jck - HD-BNC Str enchufe 4855R 5m
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.