Szczegóły produktu
7/16 DIN Male to N Male Adapter, IP67 Mated
Numer części (MPN)
Impedancja
50 Ohm
Częstotliwość
DC
Interfejs
7/16 DIN
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Adapters |
|---|---|
| Interfejs | 7/16 DIN |
| Interfejs | N |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Częstotliwość (maks.) | DC |
| Częstotliwość (maks.) | 6 GHz |
| Płeć | Male |
| Płeć | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Nickel |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Montaż | None |
| Montaż | None |
| Category | Adapters |
Opis
Aktualne dane referencyjne dla PE91211: 7/16 DIN · 50 Ohm · DC. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Częstotliwość jest podana jako DC. Rzeczywisty limit pracy zależy od zespołu, elementu współpracującego i warunków zastosowania. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LMR-240-FR-LC
LMR-240-FR-LC coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-240-FR-LC coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-240-FR-LC is constructed with a 0.240 inch diameter and Black FRPE jacket. LMR-240-FR-LC flexible 50 Ohm coax cable with PVC jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.240 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-240-FR-LC coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-240-FR-LC coax cable specs for this wire properties can be found on its RF coax cable LMR-240-FR-LC datasheet. LMR-240-FR-LC cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-240-FR-LC coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
PE6139
5 Watt RF Load Up to 7 GHz with 7/16 DIN Female Tri-Metal Plated Brass
LCCA30353-FT4
L-com's LCCA30353-FT4 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-600-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30353-FT4 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-600-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30202-FT2
L-com's LCCA30202-FT2 is a low loss N male to N male cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT2 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30199-FT2
L-com's LCCA30199-FT2 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30199-FT2 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L717SDBH25POL2VFC309
Standardowe złącza D-Sub D-SUB, Stamped Signal 3A, prosty PCB Przewlekane, Back Insulator Plus Back Shell Height 6.0 mm, 25 pin, 0.76 m (30 in) złoto, Bright cyna Shell+Grounding Dimples, 4-40 Removable Front Screwlock, bez Standoff i Boardlock
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Cstone Technology to chiński partner eksportowy oferujący kompatybilne alternatywy i nie jest powiązany z oryginalnymi markami. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.