تفاصيل المنتج
7/16 DIN Male to N Male Adapter, IP67 Mated
رقم الجزء (MPN)
المعاوقة
50 Ohm
التردد
DC
الواجهة
7/16 DIN
كابل RF مخصص من الرسم لتوريد الإنتاج
كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة. ⌄
- • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
- • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
- • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.
الصورة
انقر للتكبير.
Specifications
| الواجهة | Adapters |
|---|---|
| الواجهة | 7/16 DIN |
| الواجهة | N |
| المعاوقة | 50 Ohm |
| المعاوقة | 50 Ohm |
| التردد (الحد الأقصى) | DC |
| التردد (الحد الأقصى) | 6 GHz |
| نوع الموصل | Male |
| نوع الموصل | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Nickel |
|---|---|
| Connector Body Plating 2 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| طريقة التركيب | None |
| طريقة التركيب | None |
| Category | Adapters |
الوصف
البيانات المرجعية الحالية لـ PE91211: 7/16 DIN · 50 Ohm · DC. المعاوقة مدرجة كـ 50 Ohm. إذا كان هذا العامل حرجًا، فأكده مرة أخرى في RFQ. التردد مدرج كـ DC. الحد التشغيلي الفعلي يعتمد على التجميع وقطعة التزاوج وسياق الاستخدام. إذا لم تظهر طريقة التركيب هنا، فأكدها من الرسم أو متطلبات التزاوج. المادة مدرجة كـ Brass. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.
استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.
موصلات مشابهة
قد تهمك أيضًا هذه النماذج:
LMR-240-FR-LC
LMR-240-FR-LC coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-240-FR-LC coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-240-FR-LC is constructed with a 0.240 inch diameter and Black FRPE jacket. LMR-240-FR-LC flexible 50 Ohm coax cable with PVC jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.240 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-240-FR-LC coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-240-FR-LC coax cable specs for this wire properties can be found on its RF coax cable LMR-240-FR-LC datasheet. LMR-240-FR-LC cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-240-FR-LC coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
PE6139
5 Watt RF Load Up to 7 GHz with 7/16 DIN Female Tri-Metal Plated Brass
LCCA30353-FT4
L-com's LCCA30353-FT4 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-600-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30353-FT4 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-600-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30202-FT2
L-com's LCCA30202-FT2 is a low loss N male to N male cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT2 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30199-FT2
L-com's LCCA30199-FT2 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30199-FT2 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L717SDBH25POL2VFC309
موصلات D-Sub القياسية D-SUB, Stamped Signal 3A, مستقيم PCB ثقب نافذ, Back Insulator Plus Back Shell Height 6.0 mm, 25 سن, 0.76 m (30 in) ذهب, Bright قصدير Shell+Grounding Dimples, 4-40 Removable Front Screwlock, بدون Standoff و Boardlock
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية. ⌄
إخلاء المسؤولية
تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. Cstone Technology هي شريك توريد تصدير مقره الصين لبدائل متوافقة وليست تابعة للعلامات التجارية الأصلية. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.