Butiran produk
The TA-PJ-6 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
Nombor bahagian (MPN)
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | TNC Coaxial Attenuator |
|---|---|
| Penarafan IP | {'text': "The TA-PJ-6 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Operating Frequency Range': '2 GHz', 'V.S.W.R': '1.2(Max.) at DC~2GHz', 'Rated Power (W)': '1W', 'Attenuation (dB)': '6±0.8dB up to 2GHz'} |
| Material/Plating/Attachment | {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'} |
| Category | TNC Coaxial Attenuator |
| Product Features | 50Ω; Coaxial Attenuator; Made to order product; RoHS2 |
Penerangan
MPN rujukan tersedia untuk TA-PJ-6; pengesahan akhir bergantung pada lukisan, spesifikasi atau BOM. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Bahan disenaraikan sebagai {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'}. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
SC2182
TNC Male Open Circuit Connector Cap
TNC6100-0223
TNC reverse polarity plug crimp for RG223; 5GHz VSWR1.2
FMC00978
TNC Male to RA TNC Male Cable LMR-240-UF Coax with Heat Shrink
122477
TNC Jack LMR-600 Bulkhead Rear Mount 50 Ohm
LCCA30327-FT1
L-com's LCCA30327-FT1 is a low loss N female to TNC male cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30327-FT1 L-com Low Loss N Female to TNC Male Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-850-226-072
TNC Straight Plug to TNC Straight Plug LMR-400 50 Ohm 72 inches
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.