Detalles del producto
The TA-PJ-6 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
Número de parte (MPN)
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | TNC Coaxial Attenuator |
|---|---|
| Grado IP | {'text': "The TA-PJ-6 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Operating Frequency Range': '2 GHz', 'V.S.W.R': '1.2(Max.) at DC~2GHz', 'Rated Power (W)': '1W', 'Attenuation (dB)': '6±0.8dB up to 2GHz'} |
| Material/Plating/Attachment | {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'} |
| Category | TNC Coaxial Attenuator |
| Product Features | 50Ω; Coaxial Attenuator; Made to order product; RoHS2 |
Descripción
Hay un MPN de referencia para TA-PJ-6; la confirmación final depende del plano, especificación o BOM. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'}. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
SC2182
TNC Male Open Circuit Connector Cap
TNC6100-0223
TNC reverse polarity plug crimp for RG223; 5GHz VSWR1.2
FMC00978
TNC Male to RA TNC Male Cable LMR-240-UF Coax with Heat Shrink
122477
TNC Jack LMR-600 Bulkhead Rear Mount 50 Ohm
LCCA30327-FT1
L-com's LCCA30327-FT1 is a low loss N female to TNC male cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30327-FT1 L-com Low Loss N Female to TNC Male Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-850-226-072
TNC Straight Plug to TNC Straight Plug LMR-400 50 Ohm 72 inches
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.