Butiran produk
SMA Male to SMA Male Cable Using PE-SR047AL Coax
Nombor bahagian (MPN)
Impedans
50
Antara muka
SMA
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Cable Assemblies |
|---|---|
| Antara muka | PE-SR047AL |
| Antara muka | SMA |
| Antara muka | SMA |
| Impedans | 50 |
| Impedans | 50 |
| Impedans | 50 |
| Jantina penyambung | Male |
| Jantina penyambung | Male |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | PE-SR047AL |
| Category | Cable Assemblies |
Penerangan
Data rujukan semasa untuk PE3387: SMA · 50 · Straight. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 50. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
LCCA30277-FT6
L-com's LCCA30277-FT6 is a low loss SMA male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30277-FT6 L-com Low Loss SMA Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCAD30021
These L-com RF Coaxial Adapters are used to interface between SMB to SMB with coaxial connections. The LCAD30021 is a tee adapter with a plug to jack configuration. This Coaxial Adapter, SMB Tee Plug / Jack / Jack is made from brass and has a gold finish. The SMB interface is smaller than an SMA and uses a snap on connection. An important difference to note is that the SMB Jack (female) interface design has a Male center contact and the SMB Plug (Male) design uses a female socket for the center pin. SMB connectors generally have a maximum operating frequency of 4 GHZ and are available in 50 Ohm and 75 Ohm impedances. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
SMA6100-0213
SMA reverse polarity plug for RG213; 5.4Ghz VSWR1.25
FMCA3217
Fire Rated Low Loss MCX Plug to SMA Male Cable LMR-100-FR Coax
LCCA30278-FT4
L-com's LCCA30278-FT4 is a low loss QMA male right angle to SMA male cable assembly using LMR-240-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this QMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com QMA to SMA cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this QMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle QMA cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this QMA male to QMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30278-FT4 L-com Low Loss QMA Male Right Angle to SMA Male Cable Assembly using LMR-240-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
ADS-A8PF3-18-1.15
SMA jack ke SMP plug full detent 18 GHz VSWR1.15
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Cstone Technology ialah rakan pembekalan eksport berpangkalan di China untuk alternatif yang serasi dan tidak bergabung dengan jenama asal. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.