उत्पाद विवरण
SMA Male to SMA Male Cable Using PE-SR047AL Coax
पार्ट नंबर (MPN)
प्रतिबाधा
50
इंटरफ़ेस
SMA
drawing से custom RF cable assembly के लिए production sourcing
Compatibility review, MOQ guidance और cost-down sourcing support के साथ production-oriented drawing से custom RF cable assembly।
RFQ से पहले क्या तैयार करें स्पष्ट इनपुट अनुमान कम करते हैं और उपयोगी उत्तर को तेज़ करते हैं। ⌄
- • समीक्षा के लिए प्रासंगिक हो तो संदर्भ MPN, मिलान वाला पार्ट या स्रोत ब्रांड साझा करें।
- • यदि परियोजना प्रोटोटाइप मात्रा से आगे है तो BOM, मात्रा विभाजन और वार्षिक मांग जोड़ें।
- • ड्रॉइंग, डेटा शीट या प्रतिबाधा, आवृत्ति, माउंटिंग और प्लेटिंग की महत्वपूर्ण आवश्यकताएँ संलग्न करें।
चित्र
बड़ा करने के लिए क्लिक करें।
Specifications
| इंटरफ़ेस | Cable Assemblies |
|---|---|
| इंटरफ़ेस | PE-SR047AL |
| इंटरफ़ेस | SMA |
| इंटरफ़ेस | SMA |
| प्रतिबाधा | 50 |
| प्रतिबाधा | 50 |
| प्रतिबाधा | 50 |
| जेंडर | Male |
| जेंडर | Male |
| ओरिएंटेशन | Straight |
| ओरिएंटेशन | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| माउंटिंग | None |
|---|---|
| Connector Polarity 2 | Standard |
| माउंटिंग | None |
| केबल प्रकार | PE-SR047AL |
| Category | Cable Assemblies |
विवरण
PE3387 के लिए मौजूदा संदर्भ डेटा: SMA · 50 · Straight। कैटलॉग में कॉन्फ़िगरेशन इस प्रकार दिया गया है: Straight। प्रतिबाधा 50 दी गई है। यदि यह पैरामीटर महत्वपूर्ण है, तो RFQ में फिर से पुष्टि करें। यदि यहाँ माउंटिंग जानकारी नहीं है, तो उसे ड्रॉइंग या मिलान आवश्यकता से पुष्टि करें। इस पृष्ठ का उपयोग RFQ से पहले चयन सूची बनाने के लिए करें; यह अंतिम स्वीकृति नहीं है।
RFQ से पहले उम्मीदवार चुनने के लिए इस पृष्ठ का उपयोग करें। MOQ 200+ आपूर्ति मार्ग और कस्टम उत्पादन मार्ग ड्रॉइंग/विनिर्देश/BOM समीक्षा के बाद पुष्टि होते हैं।
समान कनेक्टर
आपको ये मॉडल भी रुचिकर लग सकते हैं:
LCCA30277-FT6
L-com's LCCA30277-FT6 is a low loss SMA male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30277-FT6 L-com Low Loss SMA Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCAD30021
These L-com RF Coaxial Adapters are used to interface between SMB to SMB with coaxial connections. The LCAD30021 is a tee adapter with a plug to jack configuration. This Coaxial Adapter, SMB Tee Plug / Jack / Jack is made from brass and has a gold finish. The SMB interface is smaller than an SMA and uses a snap on connection. An important difference to note is that the SMB Jack (female) interface design has a Male center contact and the SMB Plug (Male) design uses a female socket for the center pin. SMB connectors generally have a maximum operating frequency of 4 GHZ and are available in 50 Ohm and 75 Ohm impedances. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
SMA6100-0213
SMA reverse polarity plug for RG213; 5.4Ghz VSWR1.25
FMCA3217
Fire Rated Low Loss MCX Plug to SMA Male Cable LMR-100-FR Coax
LCCA30278-FT4
L-com's LCCA30278-FT4 is a low loss QMA male right angle to SMA male cable assembly using LMR-240-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this QMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com QMA to SMA cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this QMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle QMA cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this QMA male to QMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30278-FT4 L-com Low Loss QMA Male Right Angle to SMA Male Cable Assembly using LMR-240-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
ADS-A8PF3-18-1.15
SMA जैक तक SMP प्लग full detent 18 GHz VSWR1.15
MPN खोज Exact, prefix और partial matching समर्थित है। ⌄
अस्वीकरण
निर्माता के नाम, ट्रेडमार्क, प्रतीक और पार्ट नंबर केवल पहचान और क्रॉस-रेफ़रेंस के लिए उपयोग किए जाते हैं। Cstone Technology संगत विकल्पों के लिए चीन स्थित निर्यात सोर्सिंग पार्टनर है और मूल ब्रांडों से संबद्ध नहीं है। ट्रेडमार्क उनके संबंधित स्वामियों की संपत्ति बने रहते हैं। अंतिम उपयुक्तता RFQ के दौरान ड्रॉइंग/स्पेसिफ़िकेशन समीक्षा से पुष्टि की जाती है।