Butiran produk
L-com's LCCA30326-FT2 is a low loss N male right angle to TNC male cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30326-FT2 L-com Low Loss N Male Right Angle to TNC Male Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Nombor bahagian (MPN)
Impedans
50 Ohm
Antara muka
N
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Coaxial Cable Assemblies |
|---|---|
| Antara muka | LMR-400-DB |
| Antara muka | N |
| Antara muka | TNC |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Jantina penyambung | Male |
| Jantina penyambung | Male |
| Orientasi | Right Angle |
| Orientasi | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Jenis kabel | LMR-400-DB |
| Category | Coaxial Cable Assemblies |
Penerangan
Data rujukan semasa untuk LCCA30326-FT2: N · 50 Ohm · Right Angle. Katalog menyenaraikan konfigurasi sebagai: Right Angle. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Bahan disenaraikan sebagai Brass. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
LCCA30305/WP-FT1
The L-com LCCA30305/WP-FT1 is a weatherproof low loss cable assembly that comes with type N male connection with weatherproof boot on one end and TNC male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The type N male to TNC male cable assembly LCCA30305/WP-FT1 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30305/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal type N male to TNC male cable assembly as per your requirements.
R143004000
TNC / lurus plug clamp tipe kabel 2.6 / 50+75
122398
konektor RF / konektor koaksial TNC crimp plug 214 / U 50 Ω
122415RP
RP-TNC lurus crimp jack RG-8X Times LMR-240 Bulkhead Rear mounting 50 Ω
LCCA30244-FT10
L-com's LCCA30244-FT10 is a low loss TNC male to reverse polarity TNC female cable assembly using LMR-200 coax, 10 FT with Times Microwave components and ships same-day. The LMR-200 coax of this TNC cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to female gender configuration with flexible LMR-200 series coax and operates to 3 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30244-FT10 L-com Low Loss TNC Male to Reverse Polarity TNC Female Cable Assembly using LMR-200 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
TNC9100-L600
TNC reverse polarity jack crimp for JBY600,LMR600; 1GHz VSWR1.2
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.