CSTONE
قائمة RFQ

تفاصيل المنتج

L-com's LCCA30326-FT2 is a low loss N male right angle to TNC male cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30326-FT2 L-com Low Loss N Male Right Angle to TNC Male Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

بديل متوافق من التوريد الصيني — نؤكد الملاءمة وفق الرسم أو المواصفة.

رقم الجزء (MPN)

LCCA30326-FT2

المعاوقة

50 Ohm

الواجهة

N

كابل RF مخصص من الرسم لتوريد الإنتاج

كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.

كابل RF مخصص حسب الرسم →
WhatsApp — رد سريع
المهلة: 3–6 أسابيع | MOQ: 200+ قطعة
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة.
  • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
  • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
  • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.

الصورة

انقر للتكبير.

صورة المنتج

LCCA30326-FT2 product photo

LCCA30326-FT2 product photo

Specifications

Specifications for LCCA30326-FT2
الواجهةCoaxial Cable Assemblies
الواجهةLMR-400-DB
الواجهةN
الواجهةTNC
المعاوقة50 Ohm
المعاوقة50 Ohm
المعاوقة50 Ohm
نوع الموصلMale
نوع الموصلMale
الاتجاهRight Angle
الاتجاهStraight
Connector 1 Body MaterialBrass
Show 5 more specs
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
نوع الكابلLMR-400-DB
CategoryCoaxial Cable Assemblies

الوصف

البيانات المرجعية الحالية لـ LCCA30326-FT2: N · 50 Ohm · Right Angle. يعرض الكتالوج التهيئة على أنها: Right Angle. المعاوقة مدرجة كـ 50 Ohm. إذا كان هذا العامل حرجًا، فأكده مرة أخرى في RFQ. إذا لم تظهر طريقة التركيب هنا، فأكدها من الرسم أو متطلبات التزاوج. المادة مدرجة كـ Brass. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.

استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.

موصلات مشابهة

قد تهمك أيضًا هذه النماذج:

LCCA30305/WP-FT1

The L-com LCCA30305/WP-FT1 is a weatherproof low loss cable assembly that comes with type N male connection with weatherproof boot on one end and TNC male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.405 inches diameter. The type N male to TNC male cable assembly LCCA30305/WP-FT1 is built with LMR-400 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable can operate at a temperature range of -40 to 85 degrees C. Additional dimensions, specifications, and CAD drawings for this LCCA30305/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal type N male to TNC male cable assembly as per your requirements.

عرض التفاصيل →

R143004000

TNC / مستقيم قابس CLAMP نوع كابل 2.6 / 50+75

عرض التفاصيل →

122398

موصلات RF / موصلات محورية TNC كبس قابس 214 / U 50 Ω

عرض التفاصيل →

122415RP

RP-TNC مستقيم كبس مقبس RG-8X Times LMR-240 Bulkhead Rear تركيب 50 Ω

عرض التفاصيل →

LCCA30244-FT10

L-com's LCCA30244-FT10 is a low loss TNC male to reverse polarity TNC female cable assembly using LMR-200 coax, 10 FT with Times Microwave components and ships same-day. The LMR-200 coax of this TNC cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to female gender configuration with flexible LMR-200 series coax and operates to 3 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30244-FT10 L-com Low Loss TNC Male to Reverse Polarity TNC Female Cable Assembly using LMR-200 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

عرض التفاصيل →

TNC9100-L600

TNC reverse polarity jack crimp for JBY600,LMR600; 1GHz VSWR1.2

عرض التفاصيل →
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية.

يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية.

إخلاء المسؤولية

Cstone مصنع متخصص، وليس شركة تجارة، لموصلات RF والمحورية والمهايئات وتجميعات الكابلات، بما في ذلك N-type وBNC وSMA وSMP وSSMB وMMCX. نصنع الموصلات حسب رسومات 2D أو العينات، ونؤكد الملاءمة وMOQ والمهلة وتفاصيل الإنتاج عبر RFQ. لا ترتبط Cstone Technology بالعلامات الأصلية. تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.